The PROSAT PS-HS9-7030-BPR is made from filament polyester that is laser cut to bond the fibres at the edges of the wipe. This creates a very clean, non-abrasive edge that allows full use of the surface of the wipe. The wipe is chemical resistant and exceptionally low in particulates and extractable particles and extractable residues, making it ideal for general and critical cleaning. The pre-treatment reduces solvent consumption, reduces the VOC IPA associated, and maximises process control and consistency. Material & Properties Material: Polyester Length: 230 mm Width: 230 mm Pre-moistened with: 70% isopropanol, 30% deionised water Base weight: 140 g/m2 recommended for ISO class 4-8 environments sealed edges reduce particle and fibre formation abrasion and chemical resistant low amount of particles and extractable contaminants resealable bag maintains the purity and saturation level of the solvent Packaging 30 wipes in a resealable inner bag 10 inner bags in an outer bag 3 outer bags in a carton (900 wipes)

These sterile disinfectant wipes are individually packaged in tear-open sachets. They are saturated with a solution of 70% IPA and water of WFI quality. Low residue Fast-acting Bactericidal and fungicidal

Las toallitas PROSAT ® Sterile Polynit Heatseal LE están fabricadas con tejido de punto de poliéster 100 % Polynit Heatseal y vienen impregnadas con una mezcla de 70 % de IPA y 30 % de agua para preparaciones inyectables (WFI). Cada lote se comprueba antes de su liberación y se certifica con un bajo contenido de endotoxinas, inferior a < 1 unidad de endotoxinas por toallita. Los bordes sellados de la toallita garantizan que se generen muy pocas partículas y fibras. Por lo tanto, es ideal para su uso en superficies que entran en contacto con el producto. Cada bolsa resellable contiene un número reducido de toallitas para evitar residuos tras la limpieza. Cada bolsa está empaquetada en un triple envoltorio para facilitar su transporte al entorno estéril. Las toallitas preimpregnadas ofrecen numerosas ventajas, entre ellas el control de disolventes, una reducción de los compuestos orgánicos volátiles (COV), así como un mayor control y repetibilidad del proceso. La bolsa resellable permite reducir los residuos. Las toallitas PROSAT Sterile Polynit Heatseal LE están validadas como estériles y son ideales para su uso en entornos asépticos y salas blancas farmacéuticas críticas. Características y ventajas Recomendadas para entornos de clase A/B o clase ISO 5 – Áreas en contacto con el producto Tejido 100 % poliéster para una cantidad muy baja de partículas y fibras Los bordes sellados con láser reducen la formación de fibras en los bordes de la toallita Contenido de endotoxinas garantizado de < 1 EU/unidad, lo que lo hace ideal para superficies en contacto con el producto Pocas toallitas por bolsa resellable, para evitar residuos Hay disponibles bolsas colgantes de tamaño reducido, ideales para su uso en aisladores y RABS Las toallitas preimpregnadas reducen las emisiones de COV y el consumo de disolventes La bolsa resellable mantiene la pureza y el grado de saturación del disolvente

Contec’s sterile, pre-moistened cleanroom wipes are made from meltblown polypropylene saturated with 70% IPA (isopropanol) and 30% deionised water. The wipes are conveniently packaged in flat, resealable bags containing 50 wipes. Gamma-sterilised Applications : Pharmaceutical industry Biotechnology Medical technology

The PROSAT PI PS-314-BPR pre-moistened cleanroom wipe from Contec is made of split polyester and nylon microfibre, which improves the cleaning effect and ability to absorb contaminants. The microfibre fabric has a high absorption capacity and releases the alcohol to the surface in doses. Due to the metered release, the surface coverage per wipe is greater than with other pre-soaked wipes of comparable weight. Material & properties 70 % polyester / 30 % nylon Colour white Base weight 80 g/m2 In deionised water: 0.034 g/m2 In isopropanol: 0.017 g/m2 Particles P > 0.5µm; (x106/m2): 11.20 Fibres > 100µm; (x103/m2): 11.96 Cleanroom class ISO 5 GMP C/D Hydroentangled microfibre Heavy microfibre effective against bacteria in 1 minute and against yeasts in 3 minutes authorised for sale under the EU and UK Biocidal Products Regulation. (Contec IPA wipes : EU 0020460 0002 1-2) Flat, resealable pouch Fields of application Pharmaceutical industry Biotechnology Medical technology Packaging 1 inner bag with 20 wipes 10 inner bags in 1 outer bag 4 outer bags in a carton (800 wipes)

La toallita para salas blancas PROSAT PI PS-314IR-BPR de Contec, estéril (esterilizada por rayos gamma) y prehumedecida, está fabricada con microfibra dividida de poliéster y nailon, lo que mejora su eficacia de limpieza y su capacidad para absorber la suciedad. El tejido de microfibra tiene una gran capacidad de absorción y libera el alcohol de forma dosificada sobre la superficie. Gracias a esta liberación dosificada, la superficie cubierta por cada toallita es mayor que con otras toallitas prehumedecidas de peso similar. Material y propiedades 70 % poliéster / 30 % nailon Color blanco Gramaje 80 g/m2 En agua desionizada: 0,034 g/m2 En isopropanol: 0,017 g/m2 Partículas P > 0,5 µm; (x106/m2): 11,20 Fibras > 100 µm; (x10³/m²): 11,96 Clase de sala limpia ISO 5 GMP A/B Esterilizado por rayos gamma SAL 10-6 Microfibra consolidada por chorro de agua Microfibra pesada Eficaz contra las bacterias en 1 minuto y contra las levaduras en 3 minutos Autorizado para la venta según el Reglamento de la UE y del Reino Unido sobre biocidas. (Toallitas Contec IPA: EU 0020460 0002 1-2) Bolsa plana y resellable Ámbitos de aplicación Industria farmacéutica Biotecnología Tecnología médica Embalaje 1 bolsa interior con 20 toallitas 10 bolsas interiores en 1 bolsa exterior (estéril) 4 bolsas exteriores en una caja (800 toallitas)

Alternatives Cleaning Wipe InSpec IPA Standard The Inspec Premium Tub Wipes are sterile, ready-to-use disinfectant wipes. They are pre-soaked with a mixture of 70% v/v alcohol solution in WFI quality water. InSpec IPA wipes, an economical solution for wiping applications. Material & Properties Wipes material: Polyester 45% /Cellulose 55% Pre-soaked: 70% v/v alcohol solution in WFI quality water Length: 200 mm Width: 170 mm Thickness: 290 micron Colour: white Dry tensile strength MD (N/50mm) 117.1 N/m Dry tensile strength CD (N/50mm) 32.4 N/m Wet tensile MD (N/50mm) 92.6 N/m Wet tensile CD (N/50mm) 23.1 N/m Absorption capacity 612.16%. Absorption time 1.9s Packaging 130 wipes in a dispenser box 12 dispenser boxes in a carton

The sterile PROSAT Vial Wipes HCPS6044 are made from 100% Nowoven polyester pre-saturated with a mixture of 70% IPA and purified water. It has a low particle release and is therefore ideal for use in cleanrooms. The small high quality wipes can be used instead of sterile, individually wrapped alcohol prep wipes, which generate more waste and particles. The flat peel and re-seal packaging offers both quick access and easy closure and requires minimal space, making it suitable for small cleanrooms such as isolators. Material & Features Material: 100% polyester Length: 100 mm Width: 100 mm Base weight: 67 g/m2 ISO 5 GMP A/B Pre-saturated with 70% IPA and 30% purified water Reduces VOCs Controlled saturation level Effective and fast drying disinfection Resealable pouch  Packaging 60 wipes in a resealable inner bag 4 inner bags in an outer bag 2 outer bags in a sterile outer bag 3 outer bags in a carton (1440 wipes)

Inspec Tub Wipes are sterile, ready-to-use disinfectant wipes. They are pre-saturated with a mixture of 70% v/v alcohol solution in WFI-grade water. InSpec IPA wipes: a cost-effective solution for wiping applications. Material & Properties Wipe material: 45% polyester / 55% cellulose Pre-soaked: 70% v/v alcohol solution in WFI-grade water Length: 200 mm Width: 200 mm Thickness: 290 microns Colour: white Dry tensile strength MD (N/50mm) 117.1 N/m Dry tensile strength CD (N/50mm) 32.4 N/m Wet tensile strength MD (N/50mm) 92.6 N/m Wet tensile strength CD (N/50mm) 23.1 N/m Absorption capacity 612.16%. Absorption time 1.9s Packaging 200 wipes in a dispenser box 12 dispenser boxes in a carton

The Contec PROSAT PSPP0043 polypropylene wipes are impregnated with a solution of 70% isopropanol and 30% DI water. They are packaged in resealable bags. This ensures even and uniform application of the solution to a surface. Material & properties Material: Polypropylene Colour: White Base weight: 36g/m2 ISO 5 Dimensions: 230 x 280 mm Pre-moistened with a solution of 70 % isopropanol alcohol and 30 % deionised water Very pure Very low sodium content Meltblown nonwoven construction flat, resealable bag Packaging 50 wipes in a bag 40 bags in a carton

BPR listed InSpec IPA wet wipes are a ready to use disinfectant. It is a 70% v/v alcoholic solution with WFI grade water. InSpec IPA Wet Wipes are manufactured in a clean room in accordance with Good Manufacturing Practice (GMP). The solution is filtered through a 0.2 micron filter. InSpec IPA pouch wipes are highly specialised cleanroom wipes in a pouch with low linting. Material & Properties Material: 55 % cellulose, 45 % polyester Soaked with 70 % IPA/30 % WFI water Length: 230 mm Width: 230 mm Basic weight: 65.93-72.87 g/m² Thickness: 320 μm sterile Dry tensile strength machine direction (N/50 mm): 199.3 N/m2 Dry tensile strength transverse direction (N/50 mm): 55.4 N/m2 Wet tensile strength machine direction (N/50 mm): 144.8 N/m2 Wet tensile strength transverse direction (N/50 mm): 1.10 N/m2 Absorption capacity: 366-448 % Absorption time: 2.23-2.73 s Microbiological contact test for minimum effectiveness EN 1276 Bacteria 5 minutes EN 13697 Bacteria 5 minutes EN 1650 Fungi 15 minutes EN 13697 Fungi 15 minutes Packaging 50 wipes in one bag 16 bags in one carton