Reusable Safety Spectacles Over Spectacles Univet #619
Technical properties Sterilisable in an autoclave with steam and with beta and gamma rays Reusable. Up to 30 sterilisation cycles with steam in an autoclave at 121°C, 1 atm for 30 min. possible Frame made of special material that can withstand a large number of sterilisation cycles All components made of anti-allergic material Overspecs New elasticated headband made of antistatic material with QS system for quick and easy adjustment Material TPE/PC/silicone
Full Protection Goggles BioClean Clearview BCAG
The autoclavable Cleanroom Full Protection Goggles BioClean Clearview BCAG have a super soft frame made of thermoplastic rubber with an indirect ventilation system that provides high wearing comfort and reduces the risk of contaminants entering the controlled. These safety glasses ensure a clear view through hardened, scratch-resistant polycarbonate lenses. Material & Properties Material: Thermoplastic rubber Width: 190 mm Height: 85 mm Depth: 85 mm Glass thickness: 3,1 mm Colour: white ISO 4 GMP A CAT II Autoclavable Super soft frame Indirect ventilation through openings at top and bottom Toughened, scratch-resistant and optically correct polycarbonate glass Lint- and latex-free headband Tested to withstand > 40 autoclave cycles of 30 minutes at 121°C Anti-fog performance is maintained (under laboratory conditions) for up to 25 cycles without degradation. Can be worn over corrective spectacles Packaging 1 piece in a sealed PE bag (must be removed before autoclaving) 12 PE bags in an carton
Reusable Safety Spectacles Univet #611
Technical properties Sterilisable in an autoclave with steam Reusable. Up to 40 sterilisation cycles with steam in an autoclave at 121°C, 1 atm for 30 min. possible Frame made of special material that can withstand a large number of sterilisation cycles All components made of anti-allergic material Vision correction insert for prescription lenses available on request New elasticated headband made of anti-static material with QS system for quick and easy adjustment Frame features Ventilation: indirect Protection against drops and splashes Field of vision: 220° Total weight in g: 128 Elastic headband: antistatic silicone h 30mm Quality: Cover standard: EN166 EN170 Frame: U EN166 3 4 BT 2C-1.2 CE Lens: 2C-1.2 U 1 BT CE Corrective insert Article no. 601.OP.00.99 LENS PROPERTIES Lens material: Polycarbonate Lens colour: transparent Coatings- Thickness in mm: 2.25 Base curve5.0 spherical Optical class: 1 VLT: 85.8 % UV protection: 380 nm Replacement lens
Reusable Safety Goggles SimViz
These goggles are designed for use in controlled-contamination environments such as sterile and clean rooms. Among other things, they are also used in aseptic conditions, including but not limited to the chemical, pharmaceutical and electronics industries, or hospital laboratories. These goggles have been developed to withstand repeated sterilisation in an autoclave without any noticeable changes. The careful design ensures a long service life and maximum breathability, whilst offering a wide field of vision and the ability to be worn over prescription glasses. Specifications Material: Frame: Thermoplastic rubber Lens: Impact-rated polycarbonate, premium anti-fog Strap: Silicone strap with polycarbonate snap-on clip Dimensions: Thickness: Frame: 36 mm | Strap: 2 mm | Lens: 1.8 mm Width: Frame: 175 mm | Nose bridge: 50 mm | Strap: 11.8 mm | Lens: 160 mm Height: Frame: 85 mm | Nose bridge height: 20 mm | Lens: 70 mm Colour: Blue, transparent ISO Class: 4 (recommended) GMP: A/B (recommended) Packaging: 1 piece per bag, 50 bags per Carton Areas of application: Sterile and clean rooms Aseptic working environments Chemical industry Pharmaceutical industry Electronics industry Hospital and laboratory environments Controlled or critical rooms requiring eye protection Features Steam autoclave sterilizable ClipSafe® fastening for easy putting on and taking off Lens, frame and strap withstand up to 40 autoclave cycles (121°C, 110 kPa, 30 minutes) Replaceable lenses Designed for long-term use High breathability / maximum transpiration Wide panoramic field of vision Indirect ventilation to protect against chemical splashes Can be worn over most prescription glasses Complies with safety eyewear standard EN 166 34 BT
Reusable Safety Spectacles - Over Spectacles Univet #619
Technical properties Sterilisable in an autoclave with steam and with beta and gamma rays Reusable. Up to 30 sterilisation cycles with steam in an autoclave at 121°C, 1 atm for 30 min. possible Frame made of special material that can withstand a large number of sterilisation cycles All components made of anti-allergic material Overspecs New elasticated headband made of antistatic material with QS system for quick and easy adjustment Material TPE/PC/silicone
Reusable Safety Goggles Univet #611 Antifog
The Reusable Safety Goggles Univet offer direct ventilation. TheAF121 coating applied to the lens simultaneously guarantees protection against scratches and condensation and withstands up to 10 sterilisation cycles with steam. Material & Properties Lens material: polycarbonate Frame material: Thermoplastic elastomers (TPE) Headband material: antistatic silicone h 30 mm Field of vision 220° Thickness: 2.80 mm Weight: 128 g Lens colour: Transparent Optical class 1 VLT: 89.7 % UV protection: 380 nm Base curve 5.0 spherical Sterilisable in autoclave with steam Frame made of special material that can withstand up to 40 sterilisation cycles Replaceable lens ensures longer reusability of the full-vision goggles All components made of anti-allergic material Vision correction insert for prescription lenses available on request New elastic headband made of anti-static material with QS system for quick and easy adjustment Reference standard: EN166 EN170 Frame marking: U EN166 BT 2C-1.2 CE Lens marking: 2C-1.2 U 1 BT K N CE Packaging 5 pieces in a box 20 boxes in a carton (100 pieces)
Reusable safety goggles SUPBLCLAV3
The SUPERBLAST AUTOCLAVE series has been specially developed for all Class A, B, C and D cleanrooms, under both sterile and non-sterile conditions. Its primary aim is to protect the user from the processed products, but also to protect the products from the user. In fact, the human body is one of the largest areas contaminated by microorganisms, with more than 30 million bacteria per cm² of skin. The range is designed to meet increasingly precise and technically demanding cleanroom requirements. These glasses, with their ultra-soft, thermoplastic rubber frame, offer absolute comfort and optimum protection in sensitive and sterile environments. Ultra-comfortable autoclavable safety goggles Channel for fluid drainage Adjustable headband Can be worn over prescription glasses Ultra-ventilated TPV frame Direct ventilation at the top Sealed at the bottom Polycarbonate lens Platinum coating (scratch-resistant/anti-fog) Compatible with half-mask respirators Higher number of cycles for autoclave sterilisation at 134°C compared to the other two SUPERBLAST AUTOCLAVE models Lens marking: 2C-1.2, 1 BT KNSymbols for optical class : 1. Continuous use symbols for mechanical strength : B. Medium-energy impact, withstands a 6 mm ball weighing 0.86 g at an impact speed of 120 m/sT. The strength symbol followed by the letter T permits use in situations involving very high impact energy and under extreme temperatures. Other symbols : K. Resistance to surface damage caused by fine particles N. Resistance to fogging Marking of the frame: EN166 BTEN 166: Guarantees minimum resistance to common risks (drops, deterioration due to light exposure, corrosion, heat, etc.) 3. Drops or splashes 4. Large particles > 5 microns.B. Medium-energy impact; withstands a 6 mm diameter ball weighing 0.86 g at an impact velocity of 120 m/s. T. The strength symbol followed by the letter T permits use in situations involving very high impact energy and under extreme temperatures.
Reusable Safety Spectacles Univet #611
Technical Properties Sterilisable in an autoclave with steam The AF121 coating applied to the lens protects against scratches and fogging and withstands up to 10 sterilisation cycles with steam Reusable. Up to 40 sterilisation cycles with steam in an autoclave at 121°C, 1 atm for 30 min. possible Frame made of special material that can withstand up to 40 sterilisation cycles Replaceable lens ensures longer reusability of the full-vision goggles All components made of anti-allergic material Vision correction insert for prescription lenses available on request New elasticated headband made of anti-static material with QS system for quick and easy adjustment Labelling Reference standards: EN166 EN170 Frame marking: U EN166 3 4 BT 2C-1.2 CE Lens marking: 2C-1.2 U 1 BT K N CE Frame features Ventilation: indirect Protection against drops and liquid splashes Frame material: TPR Field of vision: 220° Weight of the entirePE (g): 128 Elasticated strap: antistatic silicone h 30 mm Properties of the lenses Lens material: polycarbonate Lens colour: transparent Technical treatment: -Anti-fog -anti-scratch Thickness mm: 2.80 Curvature: base 5.0 Ciyindric Optical class: 1 VisibleLight light transmission: 89.7 %. UV protection: 380 nm Sparelensitem code: 042120M
Reusable safety goggles SUPBLCLAVE
The SUPERBLAST AUTOCLAVE series has been specially developed for all Class A, B, C and D cleanrooms, under both sterile and non-sterile conditions. Its primary aim is to protect the user from the processed products, but also to protect the products from the user. In fact, the human body is one of the largest areas contaminated by microorganisms, with more than 30 million bacteria per cm² of skin. The range is designed to meet increasingly precise and technically demanding cleanroom requirements. These goggles, with their ultra-soft, thermoplastic rubber frame, offer absolute comfort and optimum protection in sensitive and sterile environments. Ultra-comfortable autoclavable safety goggles Channel for fluid drainage Adjustable headband Can be worn over prescription glasses Ventilated TPR frame Indirect ventilation at the top Sealed at the bottom Polycarbonate lens Platinum coating (Anti-scratch/Anti-fog) Compatible with half-mask respirators Lens marking: 2C-1.2, 1 BT KNSymbols of optical class : 1. Continuous useSymbols for mechanical strength : B. Medium-energy impact, withstands a 6 mm ball weighing 0.86 g at an impact speed of 120 m/sT. The strength symbol followed by the letter T permits use in situations involving very high impact energy and under extreme temperatures. Other symbols : K. Resistance to surface damage caused by fine particles N. Resistance to fogging Marking of the frame: EN166 3 4 BTEN 166: Guarantees minimum resistance to common risks (drops, deterioration due to light exposure, corrosion, heat, etc.) 3. Drops or splashes 4. Large particles > 5 microns.B. Medium-energy impact; withstands a 6 mm ball weighing 0.86 g at an impact speed of 120 m/s. T. The strength symbol followed by the letter T permits use in very high impact energy conditions and at extreme temperatures.
Reusable Safety Goggles Univet #611 Antifog
The Reusable Safety Goggles Univet #611S10001 Antifog are full-vision goggles that can be sterilised with steam in an autoclave. The coatingAF121 applied to the lens guarantees protection against scratches and condensation at the same time and withstands up to 10 steam sterilisation cycles. Replaceable lens ensures longer reusability of the full view goggles. Material & Properties Material: Polycarbonate Lens thickness: 2.25 mm transparent lens Anti-fog coating anti-scratch coating Curvature: base 5.0 Ciyindrical Optical class: 1 VisibleLight Transmittance: 89.7%. ProtectionUV: 380 nm Ventilation: indirect Protection against drops and liquid splashes. Frame material: TPR Field of vision: 220°. Weight of the entirePE (g): 128 Rubber strap: antistatic silicone h 30 mm Up to 40 sterilisation cycles possible with steam in autoclave at 121°C, 1 atm for 30 min. Frame made of special material that can withstand up to 40 sterilisation cycles. Replaceable lens ensures longer reusability of the full-face goggles All components made of anti-allergic material Vision correction insert for prescription lenses available on request New elastic headband made of anti-static material with QS system for quick and easy adjustment Reference standards: EN166 EN170 Frame marking: U EN166 3 4 BT 2C-1.2 CE Lens marking: 2C-1.2 U 1 BT K N CE Packaging 5 pieces in a box 20 boxes in a carton (100 pieces)
Reusable safety goggles SUPBLCLAV2
The SUPERBLAST AUTOCLAVE series has been specially developed for all Class A, B, C and D cleanrooms, under both sterile and non-sterile conditions. Its primary aim is to protect the user from the processed products, but also to protect the products from the user. In fact, the human body is one of the largest areas contaminated by microorganisms, with more than 30 million bacteria per cm² of skin. The range is designed to meet increasingly precise and technically demanding cleanroom requirements. These goggles, with their ultra-soft, thermoplastic rubber frame, offer absolute comfort and optimum protection in sensitive and sterile environments. Ultra-comfortable autoclavable safety goggles Channel for fluid drainage Adjustable headband Can be worn over prescription glasses Ultra-ventilated TPR frame Direct ventilation at the top Sealed at the bottom Polycarbonate lens Platinum coating (scratch-resistant/anti-fog) Compatible with half-mask respirators Lens marking: 2C-1.2, 1 BT KNSymbols for optical class : 1. Continuous useSymbols for mechanical strength : B. Medium-energy impact, withstands a 6 mm ball weighing 0.86 g at an impact speed of 120 m/sT. The strength symbol followed by the letter T permits use in situations involving very high impact energy and under extreme temperatures. Other symbols : K. Resistance to surface damage caused by fine particles N. Resistance to fogging Marking of the frame: EN166 BTEN 166: Guarantees minimum resistance to common risks (drops, deterioration due to light exposure, corrosion, heat, etc.) 3. Drops or splashes 4. Large particles > 5 microns.B. Medium-energy impact; withstands a 6 mm diameter ball weighing 0.86 g at an impact velocity of 120 m/s. T. The strength symbol followed by the letter T permits use under very high impact energy and at extreme temperatures.