Clino CR1 EM-CR cleaning trolley
The "Clino CR1 EM-CR cleaning trolley" is the EasyMop CR system designed to be stored under a workbench. It is suitable for use in non-sterile environments, such as technical cleanrooms. Suitable for single-stage cleaning procedures. Material & Properties Frame material: cleanroom-compatible stainless steel System box material: plastic Length: 610 mm Width: 530 mm Height: 700 mm ISO 7 GMP C/D Cleaning method: EasyMop CR with ergonomically optimised system box Maximum efficiency and process reliability in a single-stage process Disposal unit 9L stainless steel container 2 EasyMop CR system boxes 1 tray for EasyMop system boxes Unit 1 x 35 L Packaging 1 piece in a transport-secured cardboard box
PurQuip Prepare pre-treatment system
A compact, mobile stainless steel preparation system. PurQuip Prepare has the following features: Completely made of stainless steel Electropolished premium surfaces Durably autoclavable and resistant to disinfectants Ultra-compact and very handy Double tray principle prevents cross-contamination Tub with scale for exact liquid dosing Abrasion-resistant smooth-running castors with grease-free stainless steel housing Compliant with DIN ISO, GMP and VDI 1 stainless steel tray for prepared mops 1 stainless steel tray for used mops 1 dosing sieve 1 mop tray For up to 10 pre-prepared mops Completely demountable Easy soaking by pouring over Specially for small and confined cleanroom areas Cleanroom class ISO 4-6 / GMP A/B (recommended) Dimensions (LxWxH): 330x530x330 mm Weight: 7,5 kg The mop preparation{{ n Pre-preparation is an advanced method for dosing moisture into Cleanroom mops. The "conventional" pressing in a flat press is no longer necessary. And this is how it works: 1 Before starting the mopping process, the required mop quantity is selected and placed in the specially designed mop container (tray 1). 2 The required amount of liquid is now placed in the scaled liquid container (tray 2). 3 The fresh liquid is distributed to the mops via a dosing sieve. Even moistening of all mops is achieved after just a few minutes. 4 The prepared mops can now be removed individually from the mop container (tray 1). A specially shaped mop support makes it easier to pick them up without hand contact. 5 Once the mopping process is complete, the used mops are dropped into the now empty liquid container (tray 2). By separating the fresh and used mops, cross-contamination is avoided.
PurMop cleaning trolley ® 2.0 Ergo 200
The PurMop ® Ergo 200 cleaning trolley is a fully contactless two-bucket mop wetting system. From picking up the mop to wetting it and discarding it, there is no need to touch the mop, the mop holder or the trolley system. This hands-free process revolutionises professional cleanroom cleaning – it guarantees the highest possible safety by reliably preventing cross-contamination. Frame made of electropolished stainless steel (premium finish) Autoclavable, easy to clean and resistant to disinfectants Lightweight and user-friendly Abrasion-resistant castors, electrically conductive Compliant with DIN ISO, GMP and VDI 2 durable plastic buckets, blue Mop dampening unit 1 stainless steel rail for blue plastic buckets Ultra-compact and easy to handle Fully dismantlable Precise mop dampening in a single step Cleanroom class ISO 5–8 (GMP A-D) Dimensions (LxWxH): 420 x 600 x 340 mm Weight: 8.9 kg
Clino CR3 FP-GMP cleaning trolley
The Clino CR3 cleaning trolley is a flexible, all-round solution. It is suitable for use in pharmaceutical cleanrooms and sterile rooms and is autoclavable. It is possible to switch between single-stage and two-stage cleaning processes. Dimensions (LxWxH): 85 x 52 x 106 cm Basic components Large base module Autoclavable special castors 100 mm Work area Ringo GMP flat press 2 stainless steel containers 25 L Stainless steel container 9 L for sterile mop covers Waste disposal Stainless steel container9 L for contaminated mop covers Cleanroom-compatible disposal bag for insertion into the lower 9 L stainless steel container, available as an accessory
EasyMop CR System Box
The EasyMop CR System Box was developed as a closed system for the pre-preparation of mop covers. Its design allows the mop cover to be picked up without being touched – contact with cleaning agents and disinfectants, as well as the risk of cross-contamination, are consistently avoided. Mop covers can be pre-prepared using the EasyMop System Box in three ways : manually by pouring: Six mop covers are placed in the System Box, followed by pouring the pre-determined amount of cleaning solution from a measuring jug or bucket. After inserting a further 6 mop covers, the system box is closed and rotated. After 5 minutes, the mop covers are evenly moistened. semi-automatically using a dosing system: Instead of manual pouring, the cleaning solution is added via a permanently installed dosing system, which ensures a constant quantity and concentration of the cleaning solution. Fully automatic in the washing machine: The mop covers are soaked in the cleaning solution during the final rinse cycle in the washing machine and spun to the desired level of moisture. They can be removed ready for use. This is only possible with special washing machine technology. Whichever option you choose – with EasyMop you’re always on the safe side. The EasyMop CR system box enables compliance with all relevant regulations for the cleaning and decontamination of cleanrooms and offers enormous application-related advantages. All components are suitable for use in cleanrooms. All dimensions are precisely tailored to the intended application. The MopJump system enables uniform pre-preparation of the mop covers as well as their contact-free pick-up. The design of the locking mechanism ensures easy handling. The five available colours allow for the reliable implementation of a zonal concept. Includes lid and seal Material: polypropylene Can be filled with 12 mop covers
PurMop cleaning trolleys®, Ergo 320
The PurMop ® Ergo 320 cleanroom cleaning trolley is a fully contactless mop wetting system. From picking up the mop through to wetting and discarding it, there is no need to touch the mop, the mop holder or the trolley system. This hands-free process revolutionises professional cleanroom cleaning – it guarantees the highest possible safety by reliably preventing cross-contamination. Material & Properties Frame material: electropolished stainless steel (premium finish) Bucket material: plastic Length: 841 mm Width: 600 mm Height: 917 mm ISO 7 GMP C/D Autoclavable, easy to clean and resistant to disinfectants Lightweight and user-friendly Abrasion-resistant castors, electrically conductive Compliant with DIN ISO, GMP and VDI 3 durable plastic buckets, blue Mop dampening unit 2 stainless steel rails for blue plastic buckets 2 additional buckets with stainless steel mounting on the rear Fully dismantlable Precise mop dampening in a single step Additional bucket for storing Weight: 13.4 kg Packaging 1 unit in a transport-secure cardboard box
Clino CR1 FP-GMP cleaning trolley
The Clino CR1-2 cleaning trolley is modular and can be stored under the workbench. It is suitable for use in pharmaceutical cleanrooms and sterile rooms and is autoclavable. It is possible to switch between single-stage and two-stage cleaning processes. Dimensions (LxWxH): 61 x 54 x 71 cm Height with press lever raised: 103 cm Basic components Small base module Pharmaceutical-grade stainless steel 1.4404 Autoclavable special castors 100 mm Work area Ringo GMP flat press Stainless steel container 25 L Stainless steel container 9 L Waste disposal Stainless steel container 9 L Unit 1 x 35 L Cleanroom-compatible waste bag 35 L available as an accessory
Clino CR4 EM-GMP cleanroom trolley
The "Clino ® CR4 EM-GMP cleaning trolley" is a high-end modular trolley: a cleanroom-compatible modular system designed for highly sensitive areas. Material & Properties Material: Stainless steel Length: 610 mm Width: 630 mm Height: 1020 mm ISO 3 GMP A/B Autoclavable special rolls 100 mm 2 EasyMop GMP system boxes 2 stainless steel containers 4 L depending on ClinoLink configuration variant 1-4 Unit 1 x 35 L Stainless steel container 9 L Cleaning method: EasyMop GMP with system box certified for sterile areas Maximum efficiency and process reliability in a single-stage process Individually configurable via the Clino modular system ClinoLink: Cleanroom-compatible connection system for customised attachment of accessories Manufactured from cleanroom-compatible stainless steel; all components are autoclavable Packaging 1 unit in a transport-secured cardboard box
AME 300 ejection mechanism
Work completely hands-free with the new AME 300 ejection mechanism for the Ergo 300 series cleaning trolleys. Thanks to this simple yet ingenious technology, the KKV40 mop holder can be opened to eject the mop into the tray below. Made of stainless steel, electropolished Removable No bending required No foot or hand contact Optionally available for every Ergo 300 series model
Clino E1e cleaning trolley
The "Clino E1e Cleaning Trolley" is the smallest possible cleaning trolley with a stainless steel press. Material & Features Frame material: Stainless steel Bucket material: Plastic Material of flat press: Clino stainless steel Length: 620 mm Width: 570 mm Height: 860 mm ISO 9 Double ball-bearing castors 75 mm 1 plastic bucket 25 l 1 plastic bucket 15 l Cleaning method: Ringo GMP flat press Full flexibility in single- and two-stage processes Minimal space requirements Packaging 1 unit in a transport-secured cardboard box
Clino CR4 SC-GMP cleaning trolley
The "Clino CR4 SC-GMP" is a high-end system trolley. The modular system suitable for cleanrooms, designed for highly sensitive areas. Materials & Properties Material: Stainless steel Length: 800 mm Width: 570 mm Height: 1030 mm ISO 3 GMP A/B Basic components : Basic module Cleanroom-grade stainless steel, high-end finish Autoclavable special castors 100 mm with deflector ring Working area : MopScoop dosing unit 200 ml incl. stainless steel Stainless steel container MopTen 2 stainless steel buckets 4 L Disposal Unit 1 x 35 L Stainless steel container 9 L Maximum efficiency and process reliability Fully enclosed system for maximum safety Individually configurable using the Clino modular system No service life issues; wipes are saturated immediately before use Packaging 1 unit in a transport-secured box
Clino CR4 SC-CR cleaning trolley
The "Clino CR4 SC-CR" cleaning trolley is a high-end modular trolley: a cleanroom-compatible modular system designed for highly sensitive areas where sterility is not required. High level of safety thanks to the fully enclosed system. Can be individually configured using the Clino modular system. Material & Properties Material: Stainless steel/plastic Length: 800 mm Width: 570 mm Height: 1070 mm ISO 7 GMP C Basic components : Basic module Cleanroom-grade stainless steel, high-end finish Special electrically conductive castors 100 mm Working area : MopScoop dosing unit incl. lid in blue EasyMop system box 2 Plus boxes Disposal unit 1 x 35 L stainless steel container 9 L Packaging 1 unit in a transport-secured box
Clino CR mini EM-GMP2 cleanroom trolley
Pre-treatment system for 20 mop covers, highly sensitive areas – minimal space requirements. Cleaning method: EasyMop GMP with system box certified for sterile areas Maximum efficiency and process reliability in a single-stage process Manufactured from stainless steel suitable for cleanrooms, all components autoclavable Working dimensions (LxWxH): 43 x 53 x 43 cm Dimensions (LxWxH): 43 x 53 x 43 cm Base components : Basic module mini Cleanroom-compatible stainless steel, high-end finish Autoclavable special castors 100 mm Working area: 1 EasyMop GMP system box
MopJump for EasyMop GMP system box
Enables contact-free pick-up of mop covers Autoclavable Compatible with EasyMop GMP system box (Art. 370133) Material: Stainless steel
EasyMop GMP system box
The completely newly developed EasyMop GMP system box enables compliance with all relevant regulations for cleaning and disinfecting cleanrooms and offers enormous advantages in terms of application technology: All assemblies are made from materials certified for use in pharmaceutical cleanrooms. All dimensions are precisely matched to the intended use. Optional: The MopJump system with displacement chamber enables uniform pre-preparation of the mop covers and contact-free pick-up. Including lid and seal The triple seal guarantees that the system box is securely closed. System box can be filled with 10 mop covers The mop covers can be autoclaved in the system box Material: Stainless steel To use the EasyMop GMP system box, you need the MopJump insert insert (Art. 370134).