Alternatives ClearKlens DE Disinfectant | 0.9 litre spray bottle ClearKlens DE Disinfectant | 5 litre canister InSpec DE is a sterile, ready-to-use disinfectant consisting of a 70% alcohol solution (denatured ethanol) and 30% WFI-grade (USP) ultrapure water, developed for biopharmaceutical and medical device cleanrooms. The product can be used to wipe down equipment, hard surfaces (floors, walls and ceilings) and to spray gloved hands. It is manufactured in accordance with GMP standards in an ISO Class 6 cleanroom. The product is filled and capped under an ISO Class 5 laminar flow hood. The solution is filtered through a 0.2 µm filter and gamma-irradiated at 25 kGy following a validated process to ensure a guaranteed sterility level (SAL) of 10⁻⁶. Material & Properties Solution: 70% denatured ethanol and 30% ultrapure water Double-packed Low residue Fast-acting Bactericidal and fungicidal (kills fungi) Irradiation mark Manufactured in accordance with GMP Complies with standards EN 1276 (bacteria), EN 1650 (yeasts and moulds) and EN 13697 (surface testing for bacteria, yeasts and moulds) Packaging 500 ml bottle 8 bottles per carton

The ClearKlens Bi-Spore RTU VH26S is a two-component system for generating a solution with 250 ppm chlorine dioxide. It consists of a base solution and an activator. ClearKlens Bi-Spore RTU is suitable for disinfecting surfaces and equipment in the particularly critical sterile areas of the pharmaceutical and medical industries. ClearKlens Bi-Spore RTU is supplied as a ready-to-use package consisting of 4.9 litres of basic WFI solution and 100ml of activator. Material & Properties Active ingredient: 50ppm chlorine dioxide / WFI water clear, colourless liquid GMP A/B Production takes place in compliance with GMP guidelines (Good Manufacturing Practices) in an ISO class 7 environment, filling is carried out in clean room class ISO 5 0.2 µm filtered Aseptically filled ClearKlens Bi-Spore RTU is supplied as a ready-to-use package consisting of 4.9 litres of basic WFI solution (water for injection) and 100 ml of activator Very good sporocidal effect after just 5 minutes exposure time (in accordance with DIN EN 13704) Broad spectrum of effectiveness Detex label for proof of irradiation Base and activator are each double-packed to simplify transport to the cleanroom Suitable for wipe and mop application Packaging double packed 4 canisters in one carton

ClearKlens DE VH29 is a disinfectant for use in cleanrooms in the pharmaceutical and medical manufacturing industry. It is based on 70% alcohol and 10 ppm Bitrex. ClearKlens DE VH29 is 0.2µm filtered, irradiated and double packaged and is supplied as a 900ml ready to use solution.The bottle in which ClearKlens DE VH29 is supplied has no back suction due to a special device which protects the contents of the bottle against contamination during use of the product. Material & Properties Active ingredient: 70% ethanol / 30% WFI water plus 10ppm Bitrex Clear, colourless liquid GMP A/B Ready to use for the disinfection of work surfaces and equipment in cleanrooms 0.2 µm filtered Sterile Gamma-irradiated (900 ml spray bottle) or sterile filtered (5 litre canister) Sterility test in accordance with the European Pharmacopoeia Provided with a physical-chemical analysis and irradiation certificate (Detex) Odourless No discolouration Low toxicity Wide range of applications Double-packed for easy transport to cleanrooms Packaging 1 bottle double packed 6 bottles in one carton

ClearKlens Cleansinald RTU VH9S sterile disinfectant is a ready-to-use disinfectant for all types of surfaces in cleanrooms within the pharmaceutical and medical industries. It can be used on all standard materials found in such environments, provided the instructions for use are followed. If in doubt, it is advisable to test compatibility with specific surfaces before long-term use. The disinfectant has been comprehensively tested in accordance with DIN EN 1040, EN 1276 and EN 1650. Particularly suitable for EU-GMP Class A and EU-GMP Class B cleanrooms. Material & Properties Based on alkylamines and quaternary ammonium compounds (QACs) Appearance: Clear, colourless to pale yellow liquid pH (20°C): 9.0 - 11.4 Density (20°C): 1.0 ± 0.005 g/cm³ Chemical oxygen demand (COD): 3 mg O2/g ISO 5 GMP A/B 0.5% solution of ClearKlens Cleansinald concentrate, mixed with WFI (Water for Injection) and subsequently filtered through a 0.22 µm filter For the disinfection of walls, floors, ceilings and equipment in cleanrooms within the pharmaceutical and medical manufacturing industry Suitable for sprayand mop applications Filtered to 0.22 µm Sterile filtered Aseptically packaged Double-packed to facilitate transport into the cleanroom Packaged under cleanroom conditions in double, separately heat-sealed PE-bags and radio-sterilised prior to filling Broad spectrum of activity Low toxicity Supplied with a certificate of conformity Ready for use Packaging 4 canisters per box  

The sterile "InSpec QT RTU" is a double-chain quaternary ammonium compound with cleaning and disinfecting properties. It is supplied sterile, double packaged and gamma irradiated and is available as a concentrate and as a pre-diluted solution with ultrapure water WFI-Qualiy (USP) in a 5 litre canister with screw cap or 0.9 litre spray bottle. InSpec QT has been designed for use in a rotation programme with InSpec AN or InSpec OX. Material & Properties Active ingredient: 4 % quaternary ammonium compound mixed with WFI Sterile ISO 5 GMP A/B Unique non-oxidising biocide Solution of 4% quaternary ammonium compound and ultrapure water WFI-Quality (USP) Bactericidal and fungicidal (fungicidal), EN 1276, EN 1650, EN 13697, EN 1657, EN 14561, EN 14652, EN 13727, EN 13624 Effective against bacterial pathogens: MRSA, C. difficle, P. aeruginosa, coliform bacteria (e. coli), Weil's disease (Morbus Weil) Shows virucidal activity against polio (polio), enterovirus, adenovirus, norovirus, rotavirus, Polyoma SV40, influenza A (H1N1), avian flu, hepatitis B, cowpox Validated shelf life. Contents of the 1 litre spray bottle protected against "suck-back" Double packaged Ideal in rotation with InSpec OX and InSpec AN GMP-compliant manufactured in an ISO 6 cleanroom, filled and sealed under an ISO class 5 laminar flow 0.2 µm filtered and gamma irradiated according to a validated process (SAL level of 106) Packaging 5 bottles in one packaging unit 10 packaging units in a carton

A ready-to-use, surface-active disinfectant from Diversey for use in the pharmaceutical and medical industries, which consists of a mixture of amphoteric surfactants and WFI water and is supplied in a 900 ml spray bottle. In accordance with DIN EN 1276, it has a broad spectrum of efficacy against Gram-positive and Gram-negative bacteria. ClearKlens Tego® 2000 SS can be used on all common materials in the pharmaceutical and medical industry if the instructions for use are followed. If in doubt, it is advisable to test compatibility with special materials before permanent use. Material & properties Active ingredient: amphoteric disinfectant Clear, colourless liquid Ready-to-use for use on floors, walls, ceilings and equipment in the medical and pharmaceutical manufacturing industry The 900ml spray bottle in which ClearKlens Tego® 2000 SS is supplied has no back suction due to a special device, which protects the contents of the bottle against contamination during application of the product 0.2 µm filtered and aseptically packaged Sterility test in accordance with the European Pharmacopoeia Provided with a physico-chemical analysis and irradiation certificate (Detex) Odourless No discolouration Low toxicity Broad spectrum of efficacy Sterile packaging Double-packed to facilitate transport to the cleanroom Packaging double packed 6 bottles in one carton

The sterile disinfectant ClearKlens Cleansinald SS VH9S is a ready-to-use disinfectant from Diversey for surfaces of all types in cleanrooms in the pharmaceutical and medical industries. Particularly suitable for areas of cleanroom classes EU-GMP A and EU-GMP B. It can be used on all common materials in these areas if the instructions for use are followed. If in doubt, it is advisable to test the compatibility with special surfaces before permanent use. The disinfectant has been comprehensively tested in accordance with DIN EN 1040, EN 1276 and EN 1650. Material & properties Based on alkylamines and quaternary ammonium compounds (QAV) Appearance: Clear, slightly yellowish liquid pH value (20°C): 9.0 - 11.4 Density (20°C): 1.0 ± 0.005 g/cm3 Chemical oxygen demand (COD): 3 mg O2/g ISO 5 GMP A/B 0.5% solution with WFI (Water for Injection) water Spray bottle has no reverse suction due to a special device, which protects the contents of the bottle against contamination during use of the product Suitable for disinfecting walls, floors, ceilings and equipment in cleanrooms in the pharmaceutical and medical manufacturing industries 0.2 µm filtered Aseptically filled Double-packed to simplify transport to the cleanroom Broad spectrum of efficacy Low toxicity Supplied with a certificate of conformity Ready to use European Biocidal Products Directive 98/8/CE DIN EN 1276, DIN EN 13697 (bactericidal) DIN EN 1650 (fungicidal: levorucidal effect), DIN EN 13697 (fungicidal) Virucidal: HIV 1, hepatitis B, rotavirus Packaging 6 bottles in a carton

The sterile, sporicidal disinfectant ClearKlens Bi-Spore VH26 is a two-component system from Diversey for producing a solution with 250 ppm chlorine dioxide. It consists of a base and an activator (2x 100 ml). It is suitable for disinfecting surfaces and equipment in the particularly critical sterile areas of the pharmaceutical and medical industries. Product characteristics Manufactured in compliance with GMP guidelines (Good Manufacturing Practices) in an ISO class 5 environment (EU GMP class A) on an ISO class 7 substrate (EU GMP class C) 0.2 µm filtered Aseptically filled Double packaged ClearKlens Bi-Spore consists of 2 x 100 ml bottles. With 4.8 litres of WFI water (Water for Injection), these make an application solution of 5 litres Very good sporocidal effect after just 5 minutes exposure time (in accordance with DIN EN 13704) Broad spectrum of effectiveness Detex label for proof of irradiation Base and activator are each double-packed to simplify transport to the cleanroom Suitable for wipe and mop application Standards and guidelines: Cleanroom class according to DIN EN 14644-1: ISO 5 / EU-GMP A/B European Biocide Directive 98/8/CE DIN EN 1276, DIN EN 13697 (bactericidal) DIN EN 1650 (fungicidal), DIN EN 13697 (fungicidal: levorucidal effect) DIN EN 14476 (poliovirus and adenovirus) Virucidal: Avian influenza H3N8 How to use ClearKlens Bi-Spore is suitable for wiping and mop application. add 100 ml ClearKlens Bi-Spore-Activ to 4.8 litres of water. Then immediately add 100 ml ClearKlens Bi-Spore Base. Allow to stand for 2 minutes before use. Use the solution within 24 hours. Technical data Appearance: Clear, colourless to light yellow liquid pH value: 2.5 - 5.0 Density (20°C): 1.0 - 1.01 g/cm3 Total potential CIO2 content: 230 - 280 ppm Packaging 2 pieces with 100ml in a bag 25 bags in a carton

ClearKlens Cleansinald SC VH9 is a sterile, concentrated, surfactant-based cleaning and disinfecting solution / concentrate from Diversey, designed for use in cleanrooms within the pharmaceutical and medical industries. It is based on alkylamine and quaternary ammonium compounds. It can be used on all common materials in these environments provided the instructions for use are followed. In case of doubt, it is advisable to test compatibility with specific materials before long-term use. The disinfectant has been comprehensively tested in accordance with DIN EN 1040, EN 1276 and EN 1650. Material & Properties Based on alkylamines and quaternary ammonium compounds (QAV) ISO 5 GMP A/B Suitable for the disinfection of walls, floors, ceilings and equipment in the pharmaceutical and medical manufacturing industries 0.2 µm filtered Aseptically filled Double-packed, to facilitate transport into the cleanroom Supplied in 25 ml single doses Low toxicity Broad spectrum of activity Suitable for spraying, wiping and mopping. No rinsing required for surfaces not in contact with the product Smaller items or removed equipment parts can be immersed in a ClearKlens Cleansinald SC solution Packaging 5 pieces individually packed in an outer bag 10 outer bags in a box (50 pieces)

The ClearKlens Tego® 2000 SC VH25 is a concentrated, very effective disinfectant / concentrate from Diversey with a broad spectrum of activity that has been developed for use in sterile environments. Ideal for use in the pharmaceutical and medical industries, e.g. for disinfecting floors and surfaces, gloves, equipment and instruments. ClearKlens Tego® 2000 SC has a broad spectrum of activity against gram-positive and gram-negative bacteria in accordance with EN 1276. Material & Properties Appearance: Clear, colourless to light yellow liquid pH value (20°C): 8.0 Relative density (20°C): 0.998 Chemical oxygen demand (COD): 425 g O2/kg Biochemical oxygen demand (BOD): 0.142 mg O2/kg Nitrogen content (N): 19 g/kg For use on ceilings, walls, floors and equipment in the pharmaceutical and medical manufacturing industries 0.2 µm filtered Sterile packaging Sterility test according to the European Pharmacopoeia Sterilised by a validated gamma irradiation process Provided with a physico-chemical analysis and irradiation certificate (Detex) Suitable for spray application or can be applied using a wipe. Smaller objects or removed device parts can be immersed in a ClearKlens Tego® 2000 SC solution Based on amphoteric surfactants Single dose in 50 ml format Odourless No discolouration Low toxicity Broad spectrum of efficacy Also suitable for nebulisation applications Effective in hard and soft water Triple-packed to facilitate transport to the cleanroom Packaging 5 pieces triple-packed in one packaging unit 10 packaging units in one carton (50 pieces)

Alternatives Contec HydroPure | 1 litre spray bottle Contec HydroPure | 5 litre canister Disinfectant ClearKlens Bi-Spore RTU | 5 litre canister InSpec OX is a sterile sporicidal disinfectant in pre-diluted form made from peracetic acid, hydrogen peroxide and ultrapure water. The product can be used to wipe down equipment and hard surfaces (floors, walls and ceilings). InSpec OX is manufactured according to GMP standards in an ISO 6 clean room. The sporicide is filled and capped under an ISO Class 5 laminar flow. The solution is aseptically filled through a 0.2 µm filter into sterile packaging. Material & Properties Active ingredient: solution of 0.4% peracetic acid (PAA), 6% hydrogen peroxide (H2O2) and ultrapure water GMP A/B One of the most effective sporicides known Bactericidal and fungicidal (fungicidal), EN 1276, EN 1650, EN 13697 Shows spore-killing effect according to EN 13704 for Bacillus 5 minutes Double packed Ideal in rotation with InSpec AN and InSpec QT Produced according to GMP Fast action ( 5 log reduction of spores in 90 seconds. Acts on all microorganisms (very broad spectrum of activity) Very low residue on drying Classified as irritant, low hazard Stabilised solution - 24 months shelf life Packaging double packed 6 bottles in one carton

Alcohol-based surface disinfectant ClearKlens IPA VH1 sterile. A sterile, ready-to-use disinfectant from Diversey with a broad spectrum of activity for cleanrooms in the pharmaceutical industry based on 70% isopropanol and 30% WFI (Water for Injection) water. The product is produced in facilities certified to ISO 9001 and ISO 14001 (Class A / B). ClearKlens IPA has been extensively tested in the suspension test according to EN 1276 and EN 1650 as well as in the surface test according to EN 13697. These showed that it has a broad spectrum of activity against both Gram-positive and Gram-negative bacteria, yeasts and fungi. Material & properties Clear liquid free of insoluble particles Ready-to-use for the disinfection of work surfaces and processing equipment in cleanrooms Solution of 70% isopropanol and 30% WFI water 0.2 µm filtered Sterile ISO 5 GMP A/B Gamma irradiated Provided with a physical-chemical analysis and irradiation certificate (Detex) Odourless Non-perishable Low toxicity No discolouration Wide range of applications Double-packed for easy transport to cleanrooms Standards and guidelines Cleanroom class according to DIN EN 14644-1: ISO 5 / GMP A/B European Biocide Directive 98/8/CE DIN EN 1276, DIN EN 13697 (bactericidal) DIN EN 1650, DIN EN 13697 (fungicidal) Technical data pH value: 6.0 - 9.0 Density (20°C): 0.865 - 0.85 Alcohol content: 70% +/- 1% w/w Packaging double packed 6 bottles in a carton

Alternatives Sporicide Contec ProChlor | 1 litre spray bottle Sporicide Contec ProChlor | 5 litre canister InSpec HA is a sterile sporicide made from hypochlorous acid and WFI water. InSpec HA is manufactured to GMP standards in an ISO 6 clean room. The solution is aseptically filled through a 0.2µm filter into sterile packaging and sealed in an ISO Class 5 environment. The spray bottle has a validated shelf life of 3 months. Hypochlorous acid is produced by electrolysis of lye. It offers low corrosion and a mild odour. It is very safe to handle and leaves little residue, yet remains a potent sporicide. Material & Properties Active ingredient: Sporicidal mixture of hypochlorous acid with purified water Hypochlorous acid shares some of the chemical properties of hyperchlorite, but none of its negative aspects One of the safest and completely effective sporicides Very low residue Low corrosion, mild odour Bactericidal and fungicidal according to EN1276, EN1650 and EN13697 Sporocide according to EN13704 Ideal in rotation with InSpec AN and InSpec QT Manufactured according to GMP standards All versions are non-hazardous Stabilised solution - 12 month shelf life Packaging double packed 6 pieces in a carton

Alternatives Disinfectant ClearKlens IPA VH1 | 0.9 litre spray bottle Desinfectact Cleaner AGMA - Sterile Alcohol | 5 litre canister InSpec IPA is a vailidated sterile ready-to-use disinfectant consisting of a 70% alcohol solution (isopropanol) and 30% ultrapure water WFI-Quality (USP), which was developed for biopharmaceutical and medical device cleanrooms. The product can be used for wiping down equipment, hard surfaces (floors, walls and ceilings) and spraying gloved hands. InSpec IPA is manufactured to GMP standards in an ISO 6 cleanroom. The product is filled and capped under an ISO Class 5 laminar flow. The solution is filtered through a 0.2 µm filter and gamma irradiated after a vaildated process at 25 kGy to provide a guaranteed sterility level SAL of 10-6. The disinfectant is supplied with important certificates for sterility, irradiation, endotoxin and analysis. Material & Properties 70% alcohol and water solution of WFI grade Leaves little residue Fast acting Bactericidal and fungicidal effect Validated three-month shelf life after opening Contents protected by bag-in-bottle packaging for Premium range. Contents protected by filtered dispensing from spray bottle for standard range Multiple bags for cleanroom transfer Ideal disinfectant for surfaces and germ-free transfer Manufactured in accordance with good manufacturing practice (GMP) Packaging 1 bottle double-packed 6 bottles in a carton

ClearKlens Tego(r) 2000 VH25S RTU is a ready-to-use, surface-active, amphoteric disinfectant for use in the pharmaceutical and medical industries. Material & properties Manufactured in compliance with GMP (Good Manufacturing Practices) guidelines suitable for use on walls, floors, ceilings and equipment in the pharmaceutical and medical manufacturing industry can be applied using a mop or wipe. Smaller items or removed equipment parts can be immersed in a ClearKlens Tego(r) 2000 RTU solution is 0.2m filtered, aseptically filled and double packaged is supplied in a 5 litre canister Appearance: clear, colourless liquid Relative density (20°C): 1.000 pH value (20°C): 7.8 pH value (1% solution): 9.2 Chemical oxygen demand (COD): 4g 02/kg Biochem. Oxygen demand (BOD): <0.1 g 02/kg Nitrogen content (N): 0.19 g/kg Phosphorus content (P): - Advantages broad spectrum of effectiveness no discolouration low toxicity odourless 0.2m filtered and aseptically packaged double-packed for easy transport to the cleanroom Instructions for use is a ready-to-use 1% v/v aqueous solution consisting of a mixture of amphoteric surfactants and water for injection Microbiological data has a broad spectrum of efficacy against gram-positive and gram-negative bacteria in accordance with EN 1276 Packaging 1 canister double packed 4 canisters in a carton