"CyChlor Disinfectant" FBT100CC is a new broad-spectrum disinfectant for daily use. Contec CyChlor is a patented mixture of hypochlorous acid and distilled water, supplied ready for use and effective against bacteria and yeasts within 3 minutes. The product is filtered to 0.2 micrometres and filled in a Class A environment. The sterile product is then filled into pre-irradiated containers. The product is double-packed and can be used easily in pharmaceutical cleanrooms. It is supplied either as a spray bottle for small areas or as a 5-litre container with a lid when larger quantities are required. Material & Properties Active ingredient: 600 ppm hypochlorous acid in purified water ISO 5 GMP C/D Ready to use with a 2-year shelf life Double-packed in linear polyethylene tear-open bags Trigger spray with jetor mist option Not classified as corrosive Broad-spectrum action in 3 minutes saves time during bio-decontamination Filtered to 0.2 micrometres and filled in a Class A environment, to ensure the product is free from contamination and particles Suitable for use in Class A and B cleanrooms Contains no quaternary ammonium compounds or surfactants, leaving minimal residue and saving time on removal Not classified as a hazardous substance, so standard personal protective equipment is sufficient and no special disposal is required The spray bottle has a jet and a mist option – a large droplet size reduces the risk of inhalation and provides good surface coverage Packaging 6 bottles per box

The sterile disinfectant CyChlor SBC500CC is a new disinfectant with a broad spectrum of activity for daily use. Contec CyChlor is a patented mixture of hypochlorous acid and distilled water that is supplied ready to use and is effective against bacteria and yeasts in 3 minutes. The product is filtered to 0.2 microns in a class A environment and bottled. The sterile product is then filled into pre-irradiated components. The product is double packaged and can be easily used in pharmaceutical cleanrooms. It is supplied either as a nebuliser bottle for small areas or as a 5 l container with lid if larger quantities are required. Material & Properties Active ingredient: 600ppm hypochlorous acid in purified water ISO 5 GMP A/B Sterile version aseptically filled in pre-irradiated containers Ready to use with 2 year shelf life Double packed in linear polyethylene tear-off bags Trigger spray with jet or spray option or 5L sealable container for larger quantities Not classified as corrosive Broad spectrum action in 3 minutes saves time on bio-decontamination filtered to 0.2 microns and bottled in a Class A environment to ensure the product is free from contamination and particulates suitable for use in class A and B cleanrooms contains no quaternary ammonium compounds and no surfactants and therefore leaves little residue, saving time when removing them not classified as a hazardous substance, so simple personal protective equipment is sufficient and no special disposal is required Atomiser bottle has a jet and an atomiser option - large droplet size reduces the risk of inhalation and provides good area coverage Packaging 2 Canister in a Carton

NeutraKlean FBC503NK is a Neutral Purified Water Detergent (EP) NeutraKlean is a gentle and non-foaming neutral detergent designed for life science cleanroom cleaning. With a neutral pH (pH7 +/- 1) after irradiation, NeutraKlean is ideal for the low level cleaning required after maintenance and to remove disinfectant residues and general soiling. The product is 0.2 μm filtered and filled under Class A air and packaged in a Class C cleanroom. The product is supplied in two sachets and is designed to be easily introduced into pharmaceutical cleanrooms. The product is filtered ready for use. Material & Properties Colourless with lid neutral cleaning agent with distilled water pH value between 6.5 and 7.5 the container with lid is ideal for larger areas Filtered to 0.2 microns under Grade A airflow in a Grade C cleanroom Low foaming cleaning action - Ideal for use on floors/walls and benches Double wrapped in linear tear pack packaging Each bag is easy to open even with gloves on Facilitates transfer disinfection in isolators and RABS Packaging individually packed 2 canisters in a carton

The sterile ClearKlens IPA VH1 is an alcohol-based surface disinfectant. A sterile, ready-to-use disinfectant from Diversey with a broad spectrum of activity for cleanrooms in the pharmaceutical industry based on 70% isopropanol and 30% WFI (Water for Injection) water. The product is produced in facilities certified to ISO 9001 and ISO 14001 (Class A / B). ClearKlens IPA has been extensively tested in the suspension test according to EN 1276 and EN 1650 as well as in the surface test according to EN 13697. These showed that it has a broad spectrum of activity against both Gram-positive and Gram-negative bacteria, yeasts and fungi. Material & Properties Clear liquid free of insoluble particles Ready-to-use for the disinfection of work surfaces and processing equipment in cleanrooms Solution of 70% isopropanol and 30% WFI water 0.2 µm filtered Sterile ISO 5 | GMP A/B Gamma-irradiated Provided with a physico-chemical analysis and irradiation certificate (Detex) Odourless Technical Data pH value: 6.0 - 9.0 Density (20°C): 0.865 - 0.85 Alcohol content: 70% +/- 1% w/w Packaging double packed 10 bottles in a carton

El IPA al 70 % de AGMA en agua para inyección (WFI) se utiliza con frecuencia en salas blancas, como hospitales o entornos farmacéuticos. Es un producto fiable y económico para la desinfección rutinaria cuando se usa con mopas secas o toallitas. El IPA al 70 % no solo es un desinfectante de eficacia probada, sino que además se evapora por completo y no deja residuos. Fabricado en salas blancas de clase C/D Ideal para salas blancas de clase C/D en las que se aplica una estrategia de control de la contaminación Filtrado a 0,2 micras Agua ultrapura con calidad WFI Trazabilidad completa con análisis de respaldo 2 años de vida útil Eficacia validada externamente Disponible en formato de pulverizador y toallitas húmedas

Para que la desinfección sea eficaz, es imprescindible que las superficies estén libres de suciedad visible o de residuos de aplicaciones anteriores de desinfectantes. AGMA cuenta con una amplia experiencia en tecnología de tensioactivos, así como en los ámbitos de la limpieza y la desinfección. Hemos reunido todos estos conocimientos para desarrollar un limpiador neutro diseñado específicamente para su uso en salas blancas y farmacias. Gracias a sus propiedades de limpieza de superficies de alta eficacia, es ideal para la limpieza a fondo. El producto está formulado para producir poca espuma y no deja residuos ni marcas apreciables. Además, tiene un pH neutro antes de la irradiación, lo que ayuda a proteger las superficies de trabajo delicadas y los materiales susceptibles a la corrosión. Propiedades Fabricado con agua de calidad WFI Irradiado con rayos gamma para su esterilización Filtrado a 0,2micras Forma poca espuma Propiedades de limpieza de superficies muy eficaces Elimina grasas y residuos de desinfectantes Fabricado en salas blancas de clase C/D No deja residuos apreciables Totalmente trazable con los análisis correspondientes 2 años de vida útil Disponible en otros formatos Embalaje Caja con 2 bidones de 5 l

Para que la desinfección sea eficaz, es imprescindible que las superficies estén libres de suciedad visible o de residuos de aplicaciones anteriores de desinfectantes. AGMA cuenta con una amplia experiencia en tecnología de tensioactivos, así como en los ámbitos de la limpieza y la desinfección. Hemos reunido todos estos conocimientos para desarrollar un limpiador neutro diseñado específicamente para su uso en salas blancas y farmacias. Gracias a sus propiedades de limpieza de superficies de alta eficacia, es ideal para la limpieza a fondo. El producto está formulado para producir poca espuma y no deja residuos ni marcas apreciables. Además, tiene un pH neutro antes de la irradiación, lo que ayuda a proteger las superficies de trabajo delicadas y los materiales susceptibles a la corrosión. Propiedades Fabricado con agua de calidad WFI Irradiado con rayos gamma para su esterilización Filtrado a 0,2micras Forma poca espuma Propiedades de limpieza de superficies muy eficaces Elimina grasas y residuos de desinfectantes Fabricado en salas blancas de clase C/D No deja residuos apreciables Totalmente trazable con los análisis correspondientes 2 años de vida útil Disponible en otros formatos Embalaje Caja con 2 bidones de 5 l

For effective disinfection, it is essential that surfaces are free from visible dirt or residues from previous disinfectant applications. AGMA has extensive experience in surfactant technology as well as in the fields of cleaning and disinfection. This expertise has been harnessed to develop a neutral cleaning agent specifically designed for use in cleanrooms and pharmacies. Thanks to its highly effective surface cleaning properties, it is ideal for deep cleaning. The product is formulated to be low-foaming and leaves no significant residue or streaks. Furthermore, it is pH-neutral prior to irradiation, which helps to protect sensitive work surfaces and materials susceptible to corrosion. Features Made with WFI quality water Gamma irradiated for sterility 0.2 micron filtered Low foaming Highly effective surface cleaning properties Removes greases, disinfectant residue Manufactured in Grade C/D cleanrooms Does not leave significant residues Fully traceable with supporting analysis 2 year shelf life Available in various other formats Packaging 1 Piece Carton of 15 Pieces

For effective disinfection, it is essential that surfaces are free from visible dirt or residues from previous disinfectant applications. AGMA has extensive experience in surfactant technology as well as in the fields of cleaning and disinfection. This expertise has been harnessed to develop a neutral cleaning agent specifically designed for use in cleanrooms and pharmacies. Thanks to its highly effective surface cleaning properties, it is ideal for deep cleaning. The product is formulated to produce minimal foam and leaves no significant residue or streaks. Furthermore, it is pH-neutral, which helps to protect sensitive work surfaces and materials susceptible to corrosion. Properties Highly effective cleaning properties Removes grease, spills and disinfectant residues Low-foaming formulation Leaves no significant residue Manufactured using WFI-grade water Produced in Class C cleanrooms/D Fully traceable with accompanying analytical documentation 2-year shelf life 0.2-micron filtered Available in various other formats Packaging 1 Piece Carton of 15 Pieces

For effective disinfection, it is essential that surfaces are free from visible dirt or residues from previous disinfectant applications. AGMA has extensive experience in surfactant technology as well as in the fields of cleaning and disinfection. This expertise has been harnessed to develop a neutral cleaning agent specifically designed for use in cleanrooms and pharmacies. Thanks to its highly effective surface cleaning properties, it is ideal for deep cleaning. The product is formulated to be low-foaming and leaves no significant residue or streaks. Furthermore, it is pH-neutral prior to irradiation, which helps to protect sensitive work surfaces and materials susceptible to corrosion. Features Made with WFI quality water Gamma irradiated for sterility 0.2 micron filtered Low foaming Highly effective surface cleaning properties Removes greases, disinfectant residue Manufactured in Grade C/D cleanrooms Does not leave significant residues Fully traceable with supporting analysis 2 year shelf life Available in various other formats Packaging 1 Piece Carton of 6 Pieces

Sterile IPA from Contec is a mixture of 70% v/v isopropanol with 30% water for injection or distilled water. The alcohol mixture is filtered to 0.2 micron in a class C clean room (ISO class 7) and filled into bags. This clean manufacturing process in combination with the use of water for injection or distilled water guarantees that the alcohol mixture has an endotoxin content of less than 0.25 endotoxin units/ml. Contec Sterile IPA have been gamma irradiated with at least 25 kGy in a validated procedure and thus sterilised. Supplied in 0.5 litre or 1 litre nebuliser bottles equipped with a protection system that maintains sterility during use, or in 5 litre containers with lids for larger areas. The 5 litre product is mixed with distilled water, while the product in the nebuliser bottle is mixed with water for injection. Material & properties Active ingredient: 70% isopropanol ISO 5 GMP A/B guaranteed endotoxin content of < 0.25 EU/ml and therefore ideal for areas in contact with the product manufactured according to GMP (Good Manufacturing Practice) under class A laminar flow in a class C cleanroom to ensure that alcohol, containers and packaging are free from contamination and particles Atomiser bottle and bag-in-bottle protection system prevent bottle contents from becoming contaminated during use Bottles can be emptied completely, so no product is wasted or has to be disposed of during the shelf life Atomiser bottle has a jet and atomiser option - large droplet size reduces the risk of inhalation and provides good area coverage double/triple wrapped with long-side opening so that the bag can be opened easily even when wearing gloves sterile due to gamma irradiation Packaging 1 bottle double packed 8 bottles in one carton

Inspec QT Pre-prepared Wipes. A sterile, pre-diluted disinfectant wipe (minimum 2% quats formulation) mixed with WFI-grade water. Contains liquid disinfectant, chelating agents and surfactants. For hard cleanroom surfaces. 100 ml contains at least 2% w/w disinfectant formulation and 98 ml water. Instructions for use Press the liquid side of the pouch to moisten the wipes with the disinfectant. Wait 5 minutes. Tear off the wipe end of the pouch and cut along the dotted line; then remove wipes as required. Moisten the entire surface and allow to act for the appropriate duration. See technical documentation. Active ingredients Didecyldimethylammonium chloride 1.4g/kg minimum. Microbiological efficacy (min. contact time) EN 1276 Bacteria 5 min. EN 13697 Bacteria 5 min. EN 13697 Fungi 15 min. EN 1650 Fungi 15 min. 2-year shelf life Packaging 15 wipes in a pre-prepared pouch 20 pouches per box

This polyester microfibre mop with a non-woven pad offers excellent absorbency and is designed for cleaning with disinfectants on horizontal and vertical surfaces. It is ideal for general cleaning and disinfection of ceilings, walls and floors in critical environments. The microfibre material glides gently over floors and textured surfaces, ensuring excellent removal of dirt. It is ideal for general cleaning and disinfection of ceilings, walls and floors in critical environments.The microfibre material glides gently over floors and textured surfaces, providing excellent removal of dirt. Material & Properties Material: Polyester microfibre, Nylon Colour: White Length: 398 mm +/- 5 mm Width: 122 mm +/- 5 mm Sterile Absorption capacity: >305 ml/mop (>6280 ml/m²) Particles: IEST-RPcc003.2 Helke Drum test <3500 particles per mop >0.5 µm Weight: 900 g (+/- 0.045) Packaging 2 mops in a bag 10 bags in a box

Alternatives ClearKlens DE Disinfectant | 0.9 litre spray bottle ClearKlens DE Disinfectant | 5 litre canister InSpec DE is a sterile, ready-to-use disinfectant consisting of a 70% alcohol solution (denatured ethanol) and 30% WFI-grade (USP) ultrapure water, developed for biopharmaceutical and medical device cleanrooms. The product can be used to wipe down equipment, hard surfaces (floors, walls and ceilings) and to spray gloved hands. It is manufactured in accordance with GMP standards in an ISO Class 6 cleanroom. The product is filled and capped under an ISO Class 5 laminar flow hood. The solution is filtered through a 0.2 µm filter and gamma-irradiated at 25 kGy following a validated process to ensure a guaranteed sterility level (SAL) of 10⁻⁶. Material & Properties Solution: 70% denatured ethanol and 30% ultrapure water Double-packed Low residue Fast-acting Bactericidal and fungicidal (kills fungi) Irradiation mark Manufactured in accordance with GMP Complies with standards EN 1276 (bacteria), EN 1650 (yeasts and moulds) and EN 13697 (surface testing for bacteria, yeasts and moulds) Packaging 500 ml bottle 8 bottles per carton

The ClearKlens Bi-Spore RTU VH26S is a two-component system for generating a solution with 250 ppm chlorine dioxide. It consists of a base solution and an activator. ClearKlens Bi-Spore RTU is suitable for disinfecting surfaces and equipment in the particularly critical sterile areas of the pharmaceutical and medical industries. ClearKlens Bi-Spore RTU is supplied as a ready-to-use package consisting of 4.9 litres of basic WFI solution and 100ml of activator. Material & Properties Active ingredient: 50ppm chlorine dioxide / WFI water clear, colourless liquid GMP A/B Production takes place in compliance with GMP guidelines (Good Manufacturing Practices) in an ISO class 7 environment, filling is carried out in clean room class ISO 5 0.2 µm filtered Aseptically filled ClearKlens Bi-Spore RTU is supplied as a ready-to-use package consisting of 4.9 litres of basic WFI solution (water for injection) and 100 ml of activator Very good sporocidal effect after just 5 minutes exposure time (in accordance with DIN EN 13704) Broad spectrum of effectiveness Detex label for proof of irradiation Base and activator are each double-packed to simplify transport to the cleanroom Suitable for wipe and mop application Packaging double packed 4 canisters in one carton

Contec’s sterile denatured ethanol is a mixture of 70% v/v denatured ethanol and 30% water for injection or purified water. Contec’s ethanol is denatured using only IPA, resulting in a product with very low residue levels. The alcohol mixture is filtered to 0.2 microns in a Class C cleanroom (ISO Class 7) and filled into bags. This clean manufacturing process, combined with the use of water for injection or distilled water, guarantees that the alcohol mixture has an endotoxin content of less than 0.25 endotoxin units/ml. Contec sterile denatured ethanol has been sterilised by gamma irradiation at a minimum dose of 25 kGy using a validated procedure. It is supplied in 0.5 l or 1 l spray bottles equipped with a protective system that maintains sterility during use, or in 5 l containers with lids for larger areas. The 5-litre product is mixed with distilled water, whilst the product in the spray bottle is mixed with water for injection. Material & Properties Active ingredient: 70% denatured ethanol ISO 5 GMP A/B guaranteed endotoxin content of < 0.25 EU/ml, making it ideally suited for areas in contact with products manufactured in accordance with GMP (Good Manufacturing Practice) under Class A laminar flow in a Class C cleanroom, to ensure that the alcohol, container and packaging are free from contamination and particles The spray bottle and ‘bag-in-bottle’ protection system prevent the bottle’s contents from becoming contaminated during use Bottles can be completely emptied, meaning no product is wasted or needs to be disposed of during the shelf life The spray bottle has a jet and a spray option – a large droplet size reduces the risk of inhalation and provides good surface coverage Double/triple-packed with a side opening so that the pouch can be easily opened even when wearing gloves Sterilised by gamma irradiation Packaging 1 bottle double-packed 8 bottles in a box

This unique cleaning, disinfecting and sporicidal agent is ideal for use in cleanrooms. It is fast acting and will not damage stainless steel equipment. PeridoxRTU leaves no film on surfaces and is therefore ideal for use in critical areas.Assured efficacy against hard-to-kill spores and other dangerous pathogens with every cleaning and disinfection.PeridoxRTU provides maximum efficacy without the risk of damage to stainless steeland other sensitive surfaces, as well as staff handling and mixing of bleach.The ready-to-use formula eliminates staff exposure to harsh chemicals and potential concentrate dilution errors. Properties Size: 0,9 l Excellent material compatibility (Large droplet size reduces risk of inhalation and provides good surface coverage) Push-pull closure (Eliminates droplets and reduces risk of inhalation - Can be easily applied to a cloth or cleaning tool) Fast acting ( Kills spores in 3 minutes - Kills bacteria and viruses in 2 minutes) Packaging simple packed bottle 6 bottles in a carton

This alkaline cleaning agent is ideal for the initial deep clean when commissioning a new cleanroom. It effectively removes stubborn contaminants prior to disinfection, including visible dirt or residues from previous disinfectant applications. pH 12 Ideal for deep cleaning and the removal of heavily protein-based soiling Particularly effective against protein-based and organic residues Removes deposits which neutral or acidic cleaning agents may not be able to remove Low foaming Leaves no significant residues Manufactured from WFI water Manufactured in Class C/D Quality management certified to BS EN ISO 9001:2015 Manufactured in accordance with CGMP guidelines Fully traceable with supporting analysis

Las toallitas Inspec AN + son toallitas desinfectantes estériles en una bolsa de preparación previa. Se trata de una toallita desinfectante prediluida, que se aplica con un movimiento circular, mezclada con agua de calidad SFI. Desinfectante líquido que contiene una mezcla de desinfectante cuaternario, agentes quelantes y tensioactivos. Para superficies duras en salas blancas. 100 ml contienen al menos un 2 % p/p de fórmula desinfectante y 98 ml de agua. Fabricado en un entorno ISO 6 y envasado en una esclusa de aire ISO 5. El producto se filtra a 0,2 micrómetros y se envasa en bolsas esterilizadas por rayos gamma. A continuación, el producto se sella y se empaqueta doblemente. Material y propiedades Material de la toallita: 45 % poliéster/55 % celulosa Longitud: 230 mm Ancho: 230 mm Gramaje: 68 g ISO 5 GMP A/B Estéril Bolsa de preparación previa con 2 compartimentos Sin quats Plegado en Z Bis(3-aminopropil)dodecilpropano-1,3-diamina 1,4 g/kg como mínimo Eficacia microbiológica (Contacto mínimo) EN 1276 Bacterias 5 min EN 13697 Bacterias 5 min EN 13697 Levaduras 15 min EN 1650 Hongos 15 min 2 años de vida útil Embalaje 15 toallitas en una bolsa 20 bolsas en una caja

The sterile Contec ProChlor is a spore-destroying biocide with a germ reduction of 6 log levels in under 60 seconds (*EN 13704), which is effective against bacteria, fungi, moulds, yeasts, viruses and spores. The sporicide has been specially developed for use in pharmaceutical cleanrooms through filtration and double packaging.Probably the fastest acting sporicide on the market. It is manufactured in a controlled environment and filtered to 2 μm. It is particularly suitable for class C and D cleanrooms where a fast-acting and effective sporicide is required. Contec ProChlor has no hazard classification, good user acceptance and high material compatibility. Material & Properties Material: Hypochlorous acid mixed with distilled water 2000 ppm hypochlorous acid in distilled water Ready to use with a shelf life of two years Filtered to 5 microns. Double packed in linear tear polythene bags. GMP A/B Future productions: 0.2 micron filtered, 24 months shelf life Contec ProChlor is low in residues, but if residues do occur, they can be easily removed with water or alcohol Contains no quaternary ammonium or surfactants - Very little residue, which saves time when removing residues Good suitability for the user as there is no strong odour Personal protective equipment is not required Special disposal is not necessary fast acting - kills spores on a surface in less than 1 minute suitable for cleanrooms - is filtered in a controlled environment and double packaged fully validated - supplied with a test kit to EN standards safe to use - non-harmful, non-corrosive and non-disposable Packaging 6 Bottles in a Carton

The PROSAT® PS-911 ETOH wipe is pre-saturated with 70 % denatured ethanol and 30 % DI water. It is made of hot air-drawn polypropylene and releases the solvent evenly to thoroughly remove surface contamination in critical environments. The wipes are manufactured using the meltblown process to bind the fibres and reduce the number of particles without the use of chemical binders. This special hot air-drawn polypropylene contains very little sodium and other ions. Material & properties Material: Polypropylene Length: 230 mm Width: 280 mm Colour: white Base weight: 36 g/m² ISO 5 impregnated with 70% denatured ethanol / 30% DI water low-lint Packaging 30 wipes in one inner bag 10 inner bags in an outer bag 5 outer bags in a box (1500 wipes)

This unique cleaning, disinfecting and sporicidal agent is ideal for use in cleanrooms. It takes effect quickly and does not damage stainless steel equipment. PeridoxRTU leaves no film on surfaces and is therefore ideally suited for use in critical areas.Proven efficacy against hard-to-kill spores and other dangerous pathogens with every cleaning and disinfection. PeridoxRTU offers maximum efficacy without the risk of damaging stainless steel and other sensitive surfaces, and without staff having to handle and mix bleach.The ready-to-use formula eliminates staff exposure to harsh chemicals and potential errors in concentrate dilution. Features Size: 0.9 l Sterile Excellent material compatibility (large droplet size reduces the risk of inhalation and provides good surface coverage) Push-pull cap (eliminates droplets and reduces the risk of inhalation - Can be easily applied to a cloth or cleaning tool) Fast-acting (Kills spores in 3 minutes - Kills bacteria and viruses in 2 minutes) Packaging Double-wrapped bottle 6 bottles per box

ClearKlens DE VH29 is a disinfectant for use in cleanrooms in the pharmaceutical and medical manufacturing industry. It is based on 70% alcohol and 10 ppm Bitrex. ClearKlens DE VH29 is 0.2µm filtered, irradiated and double packaged and is supplied as a 900ml ready to use solution.The bottle in which ClearKlens DE VH29 is supplied has no back suction due to a special device which protects the contents of the bottle against contamination during use of the product. Material & Properties Active ingredient: 70% ethanol / 30% WFI water plus 10ppm Bitrex Clear, colourless liquid GMP A/B Ready to use for the disinfection of work surfaces and equipment in cleanrooms 0.2 µm filtered Sterile Gamma-irradiated (900 ml spray bottle) or sterile filtered (5 litre canister) Sterility test in accordance with the European Pharmacopoeia Provided with a physical-chemical analysis and irradiation certificate (Detex) Odourless No discolouration Low toxicity Wide range of applications Double-packed for easy transport to cleanrooms Packaging 1 bottle double packed 6 bottles in one carton

Alternatives AGMA Neutral Detergent | 1 litre spray bottle AGMA Neutral Detergent | 5 litre canister Contec NeutraKlean RTU | 5 litre canister InSpec N7 is a pH-neutral cleaning agent suitable for manual cleaning. It contains a low concentration of buffered non-ionic sequestrants. It can be used on most surfaces in cleanrooms and removes a wide range of residues from floors, walls, ceilings and the external surfaces of equipment. Material and properties Low concentration Filtered through a 0.2-micron filter 3-month validated ‘in-use’ shelf life Manufactured with WFI-grade water Manufactured in accordance with GMP ISO recommendation: 5 GMP: C/D Benefits Developed for cleaning floors, walls, ceilings and other hard surfaces to remove process-related residues and light soiling. Ideal for critical surfaces with soiling in the vicinity of product manufacturing Very low-foaming, low-residue cleaning agent with an excellent low toxicological profile Suitable for manual cleaning and available in practical ready-to-use and concentrated formats Packaging 460123 | 6 bottles per carton 460125 | 2 canisters per carton

Contec ProChlor is a spore-destroying biocide with a germ reduction of 6 log levels in under 60 seconds (*EN 13704), which is effective against bacteria, fungi, moulds, yeasts, viruses and spores. The sporicide has been specially developed for use in pharmaceutical cleanrooms through filtration and double packaging. Probably the fastest acting sporicide on the market. It is manufactured in a controlled environment and filtered to 2 μm. It is particularly suitable for class C and D cleanrooms where a fast-acting and effective sporicide is required. Contec ProChlor has no hazard classification, good user acceptance and high material compatibility. Material & properties Material: Hypochlorous acid mixed with distilled water 2000 ppm hypochlorous acid in distilled water Ready to use with a shelf life of two years Filtered to 5 microns. Double packed in linear tear polythene bags. GMP C/D Future productions: 0.2 micron filtered, 24 months shelf life Contec ProChlor is low in residues, but if residues do occur, they can be easily removed with water or alcohol Contains no quaternary ammonium or surfactants - Very little residue, which saves time when removing residues Good suitability for the user as there is no strong odour Personal protective equipment is not required Special disposal is not necessary fast acting - kills spores on a surface in less than 1 minute suitable for cleanrooms - is filtered in a controlled environment and double packaged fully validated - supplied with a test kit to EN standards safe to use - non-harmful, non-corrosive and non-disposable Packaging 6 bottles in a carton

NeutraKlean SBT103NK is a sterile neutral detergent with purified water (EP) NeutraKlean is a gentle and non-foaming neutral detergent designed for life science cleanroom cleaning. With a neutral pH (pH7 +/- 1) after irradiation, NeutraKlean is ideal for the low level cleaning required after maintenance and to remove disinfectant residues and general soiling. The product is 0.2 μm filtered and filled under Class A air and packaged in a Class C cleanroom. The product is supplied in two sachets and is designed to be easily introduced into pharmaceutical cleanrooms. The product is filtered ready for use. Material & Properties Colourless sterile with spray head neutral cleaning agent with distilled water pH value between 6.5 and 7.5 the container with lid is ideal for larger areas Filtered to 0.2 microns under Grade A airflow in a Grade C cleanroom Low foaming cleaning action - Ideal for use on floors/walls and benches Double wrapped in linear tear pack packaging Each bag is easy to open even with gloves on Facilitates transfer disinfection in isolators and RABS Packaging individually packed 6 bottles in a carton

Contec IPA is a mixture of 70 % v/v isopropanol with distilled water. The alcohol mixture is filtered to 0.2 microns in a class C clean room (ISO class 7) and filled into bags. It is supplied in 1 litre atomiser bottles equipped with a protection system or in 5 litre containers with lids for larger areas. An atomiser bottle with a closed "bag-in-bottle" system prevents contamination of the bottle contents during use. Features & Benefits manufactured to GMP (Good Manufacturing Practice) under Class A laminar flow in a Class C cleanroom to ensure alcohol, containers and packaging are free from contamination and particulates Atomiser bottle and bag-in-bottle protection system prevent bottle contents from becoming contaminated during use Bottles can be emptied completely, so no product is wasted or has to be disposed of during the shelf life Atomiser bottle has a jet and atomiser option - large droplet size reduces the risk of inhalation and provides good area coverage double packaged with long side opening so the pouch can be easily opened even when wearing gloves Packaging 6 Bottles per Carton (1L)

SatPax ® 550 wipes are made from exceptionally pure 100% melt-blown polypropylene, pre-moistened with 70% IPA and 30% deionised water. Material & Properties 100% melt-blown polypropylene Pre-moistened with 70% IPA | 30% deionised water Offers a cost-effective and easy-to-use solution compared to traditional solvent handling No chemical binders in the base material Resealable, solvent-resistant packaging Wipes in c-folded configuration for single-sheet dispensing Very low extractables and ions Very low particle- and fibre counts Excellent wet strength and abrasion resistance Reduces alcohol consumption and the costs of alcohol preparation and handling Reduces VOCemissions Increases cleaning efficiency Improves consistency of the cleaning protocol Reduces VOC emissions (volatile organic compounds) Lightweight construction reduces waste disposal by weight compared to typical heavier non-woven products Complies with RoHS Registered under REACH Designed for use in ISOClass 5 and above, as well as for applications in accordance with USP <797> Designed for use in the wet cleaning of critical surfaces where control of flammable solvents and flammable solvent concentrations is required Final cleaning of surfaces or products prior to manufacturing or packaging The high saturation level is ideal for removing cleaning residues in regulated environments ECRegulation 1935 (2004) – Food contact compliant FDA 21 CFR – compliant for food contact Packaging Box of 50 wipes

The Contec HydroPure SATWipes system consists of 6% hydrogen peroxide mixed with purified water and Amplitude Theta polyester/cellulose wipes. Contec HydroPure is effective against bacteria, fungi, mould and yeasts and leaves little to no residue, making it ideal for use in critical areas. Contec HydroPure is available as a point-of-use SATWipes system. Each double-pouch pack contains a container with 100 x 54 g/m² Amplitude Theta polyester/cellulose dry wipes and a 500 ml sealed bottle of Contec HydroPure. The sterile product is filtered into pre-irradiated components. The dry wipe canister is irradiated with no less than 25 kGy. Material & Properties Wipe material: Polyester/Cellulose Wipe length: 150 mm Wipe width: 230 mm Basis weight: 54 g/m² Convenient and controlled application of disinfectants Hydrogen peroxide breaks down into water & oxygen Quick and easy to use. Very low residue, therefore suitable for critical areas Saves time as no disposal of residue is required 100 polyester/cellulose wipes in a canister Ideal for Class A/B areas Convenient to use and allows for controlled application. Filtered to 0.2 micrometres in a Class B cleanroom – Ensures the product is free from contaminants and particles Supplied sterile Suitable for Class A and B cleanrooms Not classified as corrosive Well accepted by operators as odourlessand low-risk Double-packed in linear tear-open packaging Each pouch is easy to open even when wearing gloves Packaging 100 wipes in a container and a 500 ml bottle of Hydropure, double-packed 10 containers in a box Product application Pour 500 ml of Contec HydroPure into the centre of the wipe roll. Close the lid and turn the container upside down several times until all the liquid has been absorbed into the wipes. This should take less than 5 minutes. Once the wipes are saturated with Contec HydroPure, they are suitable for sporicidal disinfection. The wipes should be used within 7 days and then disposed of. There is space on the front of the container to note the expiry date

ClearKlens Cleansinald RTU VH9S sterile disinfectant is a ready-to-use disinfectant for all types of surfaces in cleanrooms within the pharmaceutical and medical industries. It can be used on all standard materials found in such environments, provided the instructions for use are followed. If in doubt, it is advisable to test compatibility with specific surfaces before long-term use. The disinfectant has been comprehensively tested in accordance with DIN EN 1040, EN 1276 and EN 1650. Particularly suitable for EU-GMP Class A and EU-GMP Class B cleanrooms. Material & Properties Based on alkylamines and quaternary ammonium compounds (QACs) Appearance: Clear, colourless to pale yellow liquid pH (20°C): 9.0 - 11.4 Density (20°C): 1.0 ± 0.005 g/cm³ Chemical oxygen demand (COD): 3 mg O2/g ISO 5 GMP A/B 0.5% solution of ClearKlens Cleansinald concentrate, mixed with WFI (Water for Injection) and subsequently filtered through a 0.22 µm filter For the disinfection of walls, floors, ceilings and equipment in cleanrooms within the pharmaceutical and medical manufacturing industry Suitable for sprayand mop applications Filtered to 0.22 µm Sterile filtered Aseptically packaged Double-packed to facilitate transport into the cleanroom Packaged under cleanroom conditions in double, separately heat-sealed PE-bags and radio-sterilised prior to filling Broad spectrum of activity Low toxicity Supplied with a certificate of conformity Ready for use Packaging 4 canisters per box  

The sterile "InSpec QT RTU" is a double-chain quaternary ammonium compound with cleaning and disinfecting properties. It is supplied sterile, double packaged and gamma irradiated and is available as a concentrate and as a pre-diluted solution with ultrapure water WFI-Qualiy (USP) in a 5 litre canister with screw cap or 0.9 litre spray bottle. InSpec QT has been designed for use in a rotation programme with InSpec AN or InSpec OX. Material & Properties Active ingredient: 4 % quaternary ammonium compound mixed with WFI Sterile ISO 5 GMP A/B Unique non-oxidising biocide Solution of 4% quaternary ammonium compound and ultrapure water WFI-Quality (USP) Bactericidal and fungicidal (fungicidal), EN 1276, EN 1650, EN 13697, EN 1657, EN 14561, EN 14652, EN 13727, EN 13624 Effective against bacterial pathogens: MRSA, C. difficle, P. aeruginosa, coliform bacteria (e. coli), Weil's disease (Morbus Weil) Shows virucidal activity against polio (polio), enterovirus, adenovirus, norovirus, rotavirus, Polyoma SV40, influenza A (H1N1), avian flu, hepatitis B, cowpox Validated shelf life. Contents of the 1 litre spray bottle protected against "suck-back" Double packaged Ideal in rotation with InSpec OX and InSpec AN GMP-compliant manufactured in an ISO 6 cleanroom, filled and sealed under an ISO class 5 laminar flow 0.2 µm filtered and gamma irradiated according to a validated process (SAL level of 106) Packaging 5 bottles in one packaging unit 10 packaging units in a carton

Alternatives Contec NeutraKlean Neutral Cleaner | 1 litre spray bottle Contec NeutraKlean Neutral Cleaner | 5 litre canister AGMA Sterile Neutral Cleaner | 1 litre AGMA Sterile Neutral Cleaner | 5 litre canister InSpec N7 is a sterile pH-neutral detergent suitable for manual cleaning. It contains a low level of buffered non-ionic sequestrants. It can be used on most surfaces in cleanrooms and removes a wide range of residues from floors, walls, ceilings and equipment exteriors. Material and properties Low concentration filtered through a 0.2 micron filter 3 months validated 'in-use' shelf life produced with WFI quality water Manufactured according to GMP Iso recommendation: 5 GMP: A/B Advantages Designed for cleaning floors, walls, ceilings and other hard surfaces to remove process-related residues and light soiling. Ideal for critical surfaces with soiling in the vicinity of product manufacture Very low foaming, low residue detergent with an excellent low toxicological profile Suitable for manual cleaning and available in convenient ready-to-use and concentrated formats Packaging 460122 | 6 Bottles per Carton 460124 | 2 Canister with 5L per Carton

Contec HydroPure is a mixture of 6% hydrogen peroxide and distilled water. Contec HydroPure is effective against bacteria, fungi and yeasts and leaves little to no residue, making it ideal for most surfaces. HydroPure is available in 1 litre atomiser bottles and as 1 litre and 5 litre containers with lids. A sterile version is available for critical environments. The product has been filtered and bottled to 0.2 microns under Class A unidirectional airflow and packaged in a Class B cleanroom. The product is double packaged and can easily be used in pharmaceutical cleanrooms. The 1 litre nebuliser bottle has a protection system that protects the contents of the bottle during use. Properties & advantages Hydrogen peroxide breaks down into water and oxygen, leaving little residue and is well suited for product contact areas filtered to 0.2 microns in a Class B cleanroom under Class A unidirectional airflow, ensuring the product is free from contamination and particulates Atomiser bottle with closed "bag-in-bottle" system prevents contamination of the contents during use Atomiser bottle has a jet and atomiser option - large droplet size reduces the risk of inhalation and provides good area coverage double-packed with opening on the long side so that the bag can be opened easily even when wearing gloves classified as non-corrosive and can be used safely in all areas of the cleanroom Packaging 1 bottle double packed 6 bottles in one carton

Alternatives AGMA – Alkaline Cleaning Agent The InSpec N10 is a powerful alkaline cleaning agent for cleanroom walls, floors, ceilings and work surfaces. Specially developed for permanent adhesive mats. It is used for the removal of process residues and general soiling. It is an excellent cleaner, but leaves more residue than N7.Ready to use spray bottle, diluted with WFI water quality. Material & Properties Material: 4% alkaline detergent Colour: light yellow ISO 5 suitable for cleaning by hand Validated three-month shelf life after opening 2 years shelf life Application Non-sterile InSpec N10 is designed for cleaning hard surfaces by spraying, wiping by hand and with a mop. Spray at a distance of approx. 15-20 cm. 5 litre versions, pour into suitable container for mop wiping. For mop application, add 100 ml concentrate to 2.5 litres of water. Apply to surface for complete coverage. Packaging 6 bottles in a carton

A ready-to-use, surface-active disinfectant from Diversey for use in the pharmaceutical and medical industries, which consists of a mixture of amphoteric surfactants and WFI water and is supplied in a 900 ml spray bottle. In accordance with DIN EN 1276, it has a broad spectrum of efficacy against Gram-positive and Gram-negative bacteria. ClearKlens Tego® 2000 SS can be used on all common materials in the pharmaceutical and medical industry if the instructions for use are followed. If in doubt, it is advisable to test compatibility with special materials before permanent use. Material & properties Active ingredient: amphoteric disinfectant Clear, colourless liquid Ready-to-use for use on floors, walls, ceilings and equipment in the medical and pharmaceutical manufacturing industry The 900ml spray bottle in which ClearKlens Tego® 2000 SS is supplied has no back suction due to a special device, which protects the contents of the bottle against contamination during application of the product 0.2 µm filtered and aseptically packaged Sterility test in accordance with the European Pharmacopoeia Provided with a physico-chemical analysis and irradiation certificate (Detex) Odourless No discolouration Low toxicity Broad spectrum of efficacy Sterile packaging Double-packed to facilitate transport to the cleanroom Packaging double packed 6 bottles in one carton