Disposable Face Masks
When working with hazardous substances such as gases, vapours, powders and particles, personal protection should Disposable Face Masks are made of special materials such as multilayer non-woven fabric to ensure effective filtering of droplets and microorganisms. They are hygienic and practical for single use, which favors their distribution and application in various situations. hese simple but effective masks form a barrier that prevents droplets and particles from entering the nose and mouth.
We would be pleased to support you in the selection for your application. Please contact us!
FFP-2 Respirator BLS 680Next
The "BLS680Next" respirator is a moulded mask with a high-quality filter in a 3-part design, suitable for customers using cleaning agents containing chlorine, for example, and an alternative to 3M products. The BLS 600next filter masks can be used to protect the user from solid and/or liquid non-volatile particles up to 12* times the limit value (TLV-TWA). The four-point elasticated straps, internal nose clip and gasket ensure an excellent fit for most face sizes. The mask is available in two sizes to achieve the best fit test results. Thanks to the three-flap design, the device adapts perfectly to all facial movements, ensuring maximum protection and efficiency at all times. The folded bottom flap allows easy opening of the face shield without soiling the inside. Material & features Straps: Covered elasticated straps (hypoallergenic and latex-free) Nose clip: Reinforced polypropylene (inside) Valve (for 680): Polypropylene (PP); synthetic rubber Filter material: Polypropylene Storage: 10 years at +5C° to +40°C and relative humidity of less than 60% FFP2 Colour: White Two straps for behind the head ISO 6 GMP: C/D Produced in Europe (Italy) Lower breathing resistance than a normal medical face mask Each mask is individually packed Available in 2 sizes (S is 15% smaller) Packaging 10 masks in a box 6 boxes in a carton Area of application Protection against dusts/smoke/aerosols of particles of medium toxicity in concentrations up to 12 x TLV (NPF). E.g. construction industry, cement production, foundries, grinding, sanding, dust paints, glass fibre cutting, wood (not hardwood), food industry. In addition, the 670next as FFP2 NR D without valve is the suitable solution to reduce the possibility of infection by viruses/bacteria, so that it can also be used in medical applications. Certifications Certified in accordance with European Regulation 2016/425 (Personal Protective Equipment) Certified as category III PPE, assuming conformity with the harmonised standard EN 149:2001+A1:2009 Certified and controlled according to Annex D by Italcert S.r.l. (Notified Body No. 0426) CE marked
Respiratory Protection Half Mask BLS 4100next S
BLS respirator half mask 4100next, set with filter protection class A2 P2 R Preconfigured sets for direct use and POS stations in retail outlets. The set contains one BLS Series 4000 next mask and two pre-assembled filters of filter type A2 P2R - designed, for example, for use by painters. For protection against organic gases (boiling point: >65°C) + particles. The BLS 4000 respirators are made of thermoplastic rubber (TPE). They are used in combination with double bayonet filters and quick connectors and protect against toxic gases, vapours and particles. The front shield is equipped with a quick hook/unhook system and sliding rubbers. This allows the mask to be lowered quickly and easily without having to remove the headpiece. Material & features Set with one BLS Series 4000 next mask and two pre-assembled filters of filter type A2 P2R For protection against organic gases (boiling point: >65°C) + particles Size: S/M & M/L Bayonet fitting (b-lock) mask weight reduced by 25% for high wearing comfort Weight of the mask: approx. 102g easy to clean Area of application: Painting work, chemical industry, building cleaning, laboratories, hospital, manufacturing industry, construction industry Packaging 8 pieces per box
FFP-3 Respirator BLS Zer0 31 C
The new series of BLS moulded masks has been designed to offer you both: Maximum protection and maximum comfort. The breathing resistance is demonstrably significantly reduced by the filter material, the special shape and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. The silver-coloured AMOR protective layer protects the Zer0 mask from dust, liquid splashes and mechanical damage. This significantly increases the service life of the respirator. They have an upper micromesh that prevents fabric clogging and the build-up of liquids and extends the mask's service life. The ergonomic shape with elasticated straps makes it easy and secure to fit all types of faces. It offers an excellent field of vision. The nose clip, which is fitted between the layers of filter material, adapts perfectly to the nose and eye profile and ensures good vision and maximum compatibility with glasses. The integrated activated carbon layer can retain unpleasant odours caused by organic and acid gases and vapours, including ozone, in concentrations below the threshold limit value (TLV). The Zer0 respirators are reusable (R=Reusable) and have an additional dolomite dust test. As a high-end mask, it offers maximum protection against: Particles and nanoparticles, aerosols, biological agents and viruses. Material & properties Certified FFP3 R D respirator mask from European production Personal protective equipment (PPE) category III in accordance with PPE Regulation 2016/425 Exceeds the requirements of test standard EN 149:2001+A1:2009 for the degree of filtration Additional filtration of ultra-fine dust (nanoparticles) Simple, intuitive use Particularly low breathing resistance (lower than standard FFP1 masks) Dolomite dust test Integrated nose wing Packaging 5 masks per box 60 pieces per box
FFP-2 Respirator BLS 670Next
The "Respirator BLS670Next" is a high quality moulded mask in a 3-piece design, suitable for customers using cleaning agents containing chlorine, for example, and an alternative to 3M products. The BLS 600next filter masks can be used to protect the user from solid and/or liquid non-volatile particles up to 12* times the limit value (TLV-TWA). The four-point elasticated straps, internal nose clip and gasket ensure an excellent fit for most face sizes. The mask is available in two sizes to achieve the best fit test results. Thanks to the three-flap design, the device adapts perfectly to all facial movements, ensuring maximum protection and efficiency at all times. The folded bottom flap allows easy opening of the face shield without soiling the inside. Material & features Straps: Covered elasticated straps (hypoallergenic and latex-free) Nose clip: Reinforced polypropylene (inside) Valve (for 680): Polypropylene (PP); synthetic rubber Filter material: Polypropylene Storage: 10 years at +5C° to +40°C and relative humidity of less than 60% FFP2 Colour: White Two straps for behind the head ISO 6 GMP: C/D Produced in Europe (Italy) Lower breathing resistance than a normal medical face mask Each mask is individually packed Available in 2 sizes (S is 15% smaller) Packaging 16 masks in a box 6 boxes in a carton Area of application Protection against dusts/smoke/aerosols of particles of medium toxicity in concentrations up to 12 x TLV (NPF). E.g. construction industry, cement production, foundries, grinding, sanding, dust paints, glass fibre cutting, wood (not hardwood), food industry. In addition, the 670next as FFP2 NR D without valve is the suitable solution to reduce the possibility of infection by viruses/bacteria, so that it can also be used in medical applications. Certifications Certified in accordance with European Regulation 2016/425 (Personal Protective Equipment) Certified as category III PPE, assuming conformity with the harmonised standard EN 149:2001+A1:2009 Certified and controlled according to Annex D by Italcert S.r.l. (Notified Body No. 0426) CE marked
FFP-3 Respirator BLS Zer0 31
The preformed FFP3 respirator BLS Zer0 is available in numerous variants and, as a high-end mask, offers maximum protection against Particles and nanoparticles (ultra-fine dust) Aerosols biological agents Viruses Particularly low breathing resistance The breathing resistance is demonstrably significantly reduced by the filter material, the special design and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. Material & properties Certified FFP3 R D respirator mask from European production Personal protective equipment (PPE) category III in accordance with PPE Regulation 2016/425 Exceeds the requirements of test standard EN 149:2001+A1:2009 for the degree of filtration Additional filtration of ultra-fine dust (nanoparticles) Simple, intuitive use Particularly low breathing resistance (lower than standard FFP1 masks) Integrated nose wing Dolomite dust test Packaging 10 masks per box 120 pieces per box
FFP-3 Respirator BLS Zer0 33 Flat
The double-folded FFP3 respirator BLS Zer0 33 Flat is a high-end mask that offers maximum protection against Particles and nanoparticles (ultra-fine dust) Aerosols biological agents Viruses Particularly low breathing resistance The breathing resistance is demonstrably significantly reduced by the filter material, the solid core and the EOLO exhalation valve. It is lower than the standard value specified in EN 149 for FFP1 respirators Faces are shaped differently. This is why the Zer0 33 Flat is available in 2 different sizes. This is the only way you can be sure that your mask really fits tightly. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. This can be verified on site in the fit test. The silver-coloured AMOR protective layer protects the Zer0 mask from dust, aerosols, liquid splashes and mechanical damage. Protection against ultra-fine dust In addition to FFP3 filtration efficiency, the respirators in the Zer0 series offer protection against ultra-fine dust. The filter principle of the mask is based on 3 different methods: Mechanical filtration: Inhaled nanoparticles (with a size between 1 and 100 nanometres) can penetrate the cell membranes in the lungs and reach all internal organs, where they can cause serious damage. The special filter material of the Zer0 series can effectively retain even these very fine particles. Electrostatic filtration Even smaller particles are subject to further filtration by the electrostatically charged filter material. The principle here is: the smaller the particles, the stronger the electrostatic attraction and filtration. Filtration with a layer of activated carbon The activated carbon layer integrated in some models allows unpleasant odours caused by organic and acidic gases and vapours, including ozone, to be retained in concentrations below the limit value (TLV). The Zer0 respirators are reusable (R=Reusable) and have an additional dolomite dust test. The shelf life of the masks is 10 years! Material & properties Straps: Polyester (PES) and rubber Nose clip: Polypropylene (PP) inside with heat-treated metal Valve: Polypropylene (PP) Valve Membrane: Rubber Seal: Foamed polymer with polyester textile (PES) Filter material: Polypropylene (PP) Protective layer: Polyethylene (PE) Layer with activated carbon: Polyester (PES) + activated carbon Packaging 8 masks per box 48 pieces per box
FFP2 Face Mask Organic Bamboo Fibre
The Particle Filtering FFP2 Face Mask is naturally antibacterial, which prevents the formation of bad odours.In combination with the meltblown fleece in the intermediate layer, the novel bamboo respirator will be able to protect wearers from most viruses and bacteria. Here you can find a german report by ARD about the world premiere: Start-up from Wolfenbüttel introduces FFP2 masks made of bamboo With the patented and CE-certified FFP2 respiratory protection mask with inner and outer layer made of 100% organic bamboo fibre, you are doing something good for yourself and your environment. Even with the same protective effect! Material & Properties Material inner and outer layer: 100% organic bamboo fibre Material intermediate layer: meltblown, polypropylene Material nose clip: Synthetic material with slightly bendable wire Elastic rubber bands Weight: 5g Vegan materials No adhesives Antibacterial, thus odour-repellent Hypoallergenic by nature Complies with EU standards EN149:2001 + A1:2009 CE mark in relation to EC Directive 89/686/EEC Packaging 2 pieces in one packaging unit 250 packaging units in one carton
BioClean MTA Face Mask
The disposable face mask MTA is manufactured from suitable materials for use in cleanrooms. Thanks to its high bacterial and particle filtration efficiency, it reduces contamination of controlled environments. The straps ensure that the mask fits securely. Material & properties Material: Polypropylene / polyethylene Length: 210 ± 5 mm Width: 95 ± 5 mm Colour: white Sterile ISO 4 GMP A with tapes High bacterial and particle filtration efficiency Completely internal noseband Ultrasonically welded seams Latex-free Packaging individually packed 1 piece per sealed PE inner bag 50 inner bags per sealed PE outer bag 10 outer bags in a carton (500 pieces)
Face Mask Med-Comfort with straps
The Disposable Face Mask Med-Comfort is a 3-layer, green face mask with elastic straps. The flexible nose clip allows for a perfect fit. Material & Properties Material front side: 100% glass-fibre-free non-woven fabric (approx. 20g/m) Material inside: glass fibre-free filter medium (approx. 28 g/m) Material back side: 100% glass fibre-free non-woven fabric (approx. 20g/m) Nose piece material: flexible, coated aluminium wire Material straps: cotton covered elastic strap, latex-free Colour: green Length: 175 mm Width: 95 mm ISO 7 3 ply Filter performance: 98% according to EN14683 Type II CE according to MPG Directive 93/42 EWG Class 1 Packaging 50 pieces in a box 10 boxes in a carton (500 pieces) 56 boxes on a Euro pallet
Face Mask Med-Comfort with ear loops
The Disposable Face Mask Med Comfort is a 3-layer green face mask with a glass fibre-free filter medium.It has ear elastics and a flexible nose clip for a perfect fit. Material & Properties Front material: glass fibre-free non-woven fabric Material inside: glass fibre-free filter medium Material back side: glass fibre-free non-woven fabric Nose piece material: flexible coated aluminium wire Length: 175 mm ± 2 mm Width: 95 mm ± 2 mm Colour: green ISO 7 3-ply With elastic ear loops Flexible noseband for a perfect fit Filter efficiency: ≥ 98 % according to EN 14683 type II Packaging 50 pieces in a dispenser box 10 dispenser boxes in a carton
Mouthguard Pleanroom/Pharmaceutical
Well-ventilated disposable non-woven mouthguard for clean rooms. Specially developed non-woven material for the main part and elastic ear elastics made of cotton. There is a micro-denier filter between the inner and outer layers that filters more than 95% of 0.5 µm particles. Material Outer layer: polypropylene (approx. 21 g/m2). Inner side: non-woven/polypropylene (approx. 21 g/m2) Filter medium: Polypropylene (approx. 20 g/m2) Nose clip: polyester-coated wire Ear loops: Nylon Spuntex Features Particle filtration efficiency: 98% at 0.3 µm. Length: 210 mm Width: 90 mm ISO 5 Application range Semiconductor TFT-LCD Electronics production lines Food industry Hospitals Packaging 50 pieces in a bag 40 bags in a carton
Clip for mouthguard
Those who find the fastening of a mouthguard with elastic ear bands behind the ears uncomfortable or who want to wear it over a bonnet can use the clip to connect the elastic bands behind the head. The current clip offered here is blue in colour for better visibility and manageability. Material & Properties Material: plastic Colour: blue Packaging 500 clips in an inner bag 4 inner bags in one outer bag (2000 pieces)
Mouthguard Kimtech Pure M3 #62470
The Kimtech Pure M3 #62470 disposable face mask is a sterile pleated mask with high bacterial and particle filtration. It is suitable for sterile cleanrooms in accordance with EU GMP ISO 5 Class A. Latex and silicone-free masks reduce contamination with a low-linting outer layer of polyethylene film and a bicomponent inner fabric. Material & properties Outer layer made of polyethylene film Inner lining made of white BiCoSof Ear loops: White tubular knitted polyester Length: 180 mm ISO 5 GMP A sterile Comfortable fit Protective inner fabric Tapes in 18 cm length Sterility safety value 10-6 Latex and silicone free Excellent particle and bacteria filtration to prevent contamination Suitable for sterile cleanrooms and laboratories according to ISO 5 Class A (EU GMP) Made from a low-lint polyethylene film on the outside and secure inner fabric for improved protection Contain no natural rubber latex or silicone, reducing the risk of skin irritation for the wearer Packaging individually wrapped 20 pieces in a bag 10 bags in a box (200 pieces)
Mouthguard Kimtech Pure M3 #62467
The Kimtech Pure M3 #62467 sterile disposable face mask is folded and has ties for binding. This provides the essential process protection for cleanroom environments and minimises the risk of contamination. Material & properties Outer material: Low-lint polyethylene film on the outside Material inside: Inner lining made of white BiCoSof fabric Nose clip material: fully encased, soft, flexible aluminium Straps: white, hydroentangled polyester Length: 180 mm Colour: white Sterile ISO 5 GMP A Latex-free Silicone-free comfortable fit individually packed Manufactured according to ISO 9001 quality system Sterility safety value 10-6 Product performance data Particle filter efficiency (PFE): 89.0% Bacterial filter efficiency (BFE): 94.0% Differential pressure in mm H2O, at 8 l/mm flow rate: 1.98 Packaging individually packed 20 pieces in a bag 10 bags in a box (200 pieces)
BioClean MEA face mask
The sterile disposable face mask with loops BioClean MEA is manufactured from materials suitable for cleanrooms with a high particle and bacterial filtration efficiency to reduce contamination of controlled environments. It is equipped with loops and a clip closure for quick and secure fastening at the back of the head. Material & Features Material: Polypropylene / polyethylene Length: 210 mm Width: 95 mm Colour: white with ear loops ISO 4 GMP A/B High bacteria, virus and particle filtration efficiency Completely internal noseband Ultrasonically welded seams Loops with clip fastening for a secure fit Packaging 1 piece (with blue clip) in a sealed inner bag 50 inner bags in a sealed outer bag 12 outer bags in a box (600 pieces)
Mouthguard Kimtech Pure M3 #62465
The disposable cleanroom face mask Kimtech Pure M3 #62465 (previously CR Classic) from Kimberly Clark stands for clean and comfortable face masks in the cleanroom. It has ear loops and a flexible nose clip for a perfect fit. Material & Features Material: 50% polyethylene / 50% polyester Length: 180 mm Width: 90 mm Colour: white 3-ply ISO 3 GMP C/D Packaging 50 pieces in a bag (double packed) 10 bags in a carton
Bonnet with integrated face mask Kimtech Pure A5 #36072
The Kimtech A5 #36072 sterile cleanroom disposable bonnet has an integrated mask, seamlessly protecting the face and head from common contaminants. A clearly visible blue line on the inside of the bonnet indicates the correct place to grip for aseptic donning. Once donned, the secure design ensures that there are no gaps between the bonnet and mask to ensure that exhaled air is filtered and the gamma irradiated bonnets have a high bacterial filtration efficiency. Material & Features Material: High performance SMS with a fabric-like structure Size: Universal Colour: white ISO 5 GMP A CAT III Sterile gamma irradiated, sterility assurance level 10-6 Integrated bonnet and mask Elasticated rubber straps for a universal size Blue indicator to avoid touching outside Pull-down straps on the back to assist donning Folded inside out to avoid contamination High strength, bonded triple seams Individually vacuum packed Packaging individually vacuum packed 25 pieces in one bag 3 bags in a box (75 pieces)
Mouthguard Kimtech Pure M3 #62451
The Kimtech Pure M3 #62451 non-sterile face mask provides the essential process protection and comfort required in cleanroom environments, helping you to reduce the risk of contamination. Material & Features Outer mask made of clear, perforated polyethylene film Low-lint outer polythene film layer Ear loops: White tubular knitted polyester Latex and silicone free 3-ply Integrated nose clip offers a high level of comfort Width: approx. 230 mm Recommended for ISO class 3 or higher cleanroom environments Excellent particle filtration to prevent contamination Manufactured with Sontec II ultrasonic bonding for improved product integrity and strength Double bagged for cleanroom use Product performance data Particle filter efficiency (PFE): >96.9% Differential pressure in mm H2O, at 8 l/mm flow: 1.33 Packaging Bag with 50 pieces 10 bags in a carton
Particle filter mask FFP2 NR 20-21
FFP is the acronym for Filtering Face Piece. Particle-filtering half masks are categorised on the basis of their filtering efficiency and are PPE. This particulate respirator fulfils the requirements of the European standard EN 149:2001 + A1:2009 and is designed to provide respiratory protection for the wearer. This 4-layer respirator has a filter efficiency of at least 94% against particles. With nose clip and ear loops. A respirator is more robust than a face mask or medical face mask. FFP2 masks not only offer other people, but also the wearer better protection against viruses such as the coronavirus. Contrary to the manufacturer's recommendation, FFP2 masks are used several times in everyday private life. The IAB offers these masks as EW masks, because FFP2 NR means; FFP2 Not Reusable. Material & properties Material: Outer layer PP non-woven fabric Filters large particles Middle layer 1 Multi-layer PP Meltblown nonwoven Highly efficient electrostatic filter Protection against oil and dirt particles Middle layer 2 Hot air cotton High fit and comfort design Inner layer PP non-woven fabric Soft and skin-friendly Packaging 2 pieces in a bag 25 bags in a box 16 boxes in a carton (400 bags)
Face Mask RR 55/45
The RR 55/45 disposable face mask is a well-ventilated disposable face mask for the cleanroom. It is soft and therefore well suited for long wearing times. Automatically manufactured and packed in a class 1000 cleanroom. Material mask & filter Outer: 55% polyethyene, 45% polypropylene. Inside: 55% polyethyene, 45% polypropylene Filter medium: 100% polypropylene Noseband: Wire embedded in polyester; WxL 3,5x11,2mm Ear loop: PET 75% + Spandex 25%, WxL 2x160mmColour: White Length: 210 mm ± 5 mm Width: 90 mm ± 5 mm Particle Test: Air Particle ( >0.3㎛)≤ 500 ea/ft3. // corresponds to: 17,657.35 particles ( >0.3㎛)/ MQ3 Area of application Semiconductors, TFT-LCD, electronics production lines, food companies and hospitals Packaging Individually packed 50 pieces in 1 bag 20 bags in 1 carton Not a medical product, used for product protection in clean rooms.
Tyvek® IsoClean® Hood and Mask
DuPont Tyvek® IsoClean® hood and mask, model IC 9820 WH MS. Processed under cleanroom conditions and gamma-sterilised. Hood: Seams are taped. Framed head opening. Straps with loops. White colour. Mask: Folded outer layer made of polyethylene. 17.5 cm sterile. Blue. Material: Tyvek® IsoClean® CS Design: Combination of hood and mask Seams: Seamed Colour: Hood: white, mask: blue Size: One size Gamma sterilised according to SAL of 10-6 (ISO 11137-1) PPE category I
Disposable Face Mask Isofield Exa 230
The disposable mouthguard Isofiled Exa 230 has ear loops with a clip. It is made of spunbond polyester on the outside and non-woven polypropylene/polyethylene on the inside. The filter is made of non-woven meltblown polyester. Material & Properties Material: Ear loops: Latex-free knitted ear loops with green clip closure made of Polypropylene. Outer: Non-woven Spunbond Polyester Filter: Non-woven meltblown Polyester Inner: Non-woven Polypropylene/Polyethylene Length: 230 ± 5 mm Height: 95 ± 5 mm Colour: white ISO 4 GMP A Sterile (gamma irradiation, minimum 25 kGy) Particle Filtration Effiency (PFE) @ 0.1 MICRON 94% Bacterial Filtration Effiency (BFE) @ 0.3 MICRON 97% Differential Pessure (AP), MM H2O/CM² 6.8 Shelf life: 3 years from date of manufacture Packaging 50 pieces in a bag 12 bags in a carton (600 pieces)
Disposable 4-ply face mask with ear loops
The disposable face mask is 4-ply and reinforced with hexagonal polyethylene mesh. The splash-proof and anti-fog mask consists of one layer of polyethylene mesh and three layers of non-woven fabric, which are laminated together to form a "sandwich".Each layer has a different structure depending on the specific function it fulfils. In addition, a strip of soft polyethylene is integrated into the upper part of the inner side, making contact with the face feel particularly soft, like a cushion between the wearer’s face and the mask. This prevents the warm air inside the mask from rising upwards. Instead, it escapes through the sides of the mask, creating an anti-fog effect that prevents the annoying fogging of glasses and safety goggles. Material & Properties Material: Non-woven fabric / Polyethylene Size: 98 x 180 mm Splash-resistant Protective Non-macerating Ties for fastening Flexible nose clip for a perfect fit, PVC-free Prevents environmental contamination from bacteria and secretions Protects against organic splashes Filtration efficiency: 98% in accordance with EN 14683:2014 Suitable for sensitive skin (EN ISO 10993-10) Hypoallergenic (EN ISO 10993-10) Shelf life: 5 years Packaging 20 pieces individually packaged in a sachet 15 sachets in a box (300 pieces)
Disposable Face Mask BioClean DB-BDBS-G
The BioClean DB disposable face mask - BDBS-G is a sterile face mask with a large breathing chamber for increased comfort. Made from cleanroom grade materials, the BioClean DB has an integrated neck guard for added protection, reducing the risk of cross contamination. Material & Properties Inner layer: spunbonded polyester nonwoven fabric Filter layer: meltblown polyester Outer layer: non-woven spunbond polyester fabric Fasteners: Tubular knitted polyurethane spandex Neck protector: Spunbonded polyester fleece Colour: White ISO 4 GMP A Sterile Length mask: 301 mm Width mask: 100 mm Length neck guard: 245 mm Width neck guard: 210 mm Packaging 1 piece per sealed inner PE bag 20 inner bags per sealed outer PE bag 10 outer bags per lined carton (200 pieces)
Disposable Face Masks BioClean DB-BDBS
The sterile face mask BioClean DB BDBS pouch-style features a large breathing chamber for increased comfort and a mouldable noseband for a snug fit. Made from cleanroom grade materials and ultrasonically sealed edges to reduce the risk of contamination when entering the controlled environment. Material & Properties Material: Polyester / Polyurethane Length: 301 mm ± 5 mm Width: 100 mm ± 5 mm Colour: white ISO 4 GMP A Sterile With ear loops High bacterial and particle filtration efficiency Large breathing air chamber Ultrasonic welded seams Completely internal noseband Packaging Individually packed 20 pieces in a bag 10 bags in a carton (200 pieces)